{"title":"Park Ranger","description":"","products":[{"product_id":"aluminium-unterfahrschutz-kuehler-lenkgetriebe-ford-ranger-raptor","title":"Aluminum Underride Guard Radiator \u0026 Steering Ford Ranger Raptor from 2023","description":"\u003cp data-path-to-node=\"3\"\u003e\u003cb data-path-to-node=\"3\" data-index-in-node=\"0\"\u003eMaximum Front Protection for Peak Performance – Protect Your Ranger Raptor from Costly Damage!\u003c\/b\u003e\u003c\/p\u003e\n\u003cp data-path-to-node=\"4\"\u003eThe \u003cb data-path-to-node=\"4\" data-index-in-node=\"4\"\u003eMorE 4x4 aluminum skid plate\u003c\/b\u003e for the \u003cb data-path-to-node=\"4\" data-index-in-node=\"44\"\u003eFord Ranger Raptor\u003c\/b\u003e (models from 2023 onwards) offers high-strength protection for two of the most important and vulnerable components at the front of the vehicle: the \u003cb data-path-to-node=\"4\" data-index-in-node=\"224\"\u003eradiator\u003c\/b\u003e and the \u003cb data-path-to-node=\"4\" data-index-in-node=\"239\"\u003esteering gear\u003c\/b\u003e. The Raptor is built for high-speed off-road driving and tough conditions. However, low-hanging branches, kicked-up rocks, hard crests, or deep ruts can quickly damage the exposed underside of the front, potentially leading to fatal coolant loss or blocked steering.\u003c\/p\u003e\n\u003cp data-path-to-node=\"5\"\u003eThis vehicle-specific underbody protection has been developed precisely for these extreme situations. Thanks to its well-thought-out design, this skid plate can be \u003cb data-path-to-node=\"5\" data-index-in-node=\"149\"\u003einstalled completely independently and separately\u003c\/b\u003e, without necessarily requiring the other components of the underbody system to be installed. It integrates seamlessly directly under the original factory front bumper.\u003c\/p\u003e\n\u003cblockquote data-path-to-node=\"6\"\u003e\n\n\u003cp data-path-to-node=\"6,0\"\u003e💡 \u003cb data-path-to-node=\"6,0\" data-index-in-node=\"3\"\u003eImportant note on product images:\u003c\/b\u003e To show you the full extent of the underbody protection on the vehicle, some photos depict multiple skid plates. The scope of delivery for this item includes only the front \u003cb data-path-to-node=\"6,0\" data-index-in-node=\"231\"\u003eradiator and steering gear skid plate\u003c\/b\u003e. The other skid plates (for engine, transmission, fuel tank, etc.) are not included in the scope of delivery but can be purchased separately in our shop.\u003c\/p\u003e\n\n\n\u003c\/blockquote\u003e\n\u003ch3 data-path-to-node=\"7\"\u003e\u003cb data-path-to-node=\"7\" data-index-in-node=\"0\"\u003eYour advantages at a glance:\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul data-path-to-node=\"8\"\u003e\n\n\u003cli\u003e\n\n\u003cp data-path-to-node=\"8,0,0\"\u003e\u003cb data-path-to-node=\"8,0,0\" data-index-in-node=\"0\"\u003ePerfectly vehicle-specific:\u003c\/b\u003e Tailor-made for the \u003cb data-path-to-node=\"8,0,0\" data-index-in-node=\"52\"\u003eFord Ranger Raptor (from 2023)\u003c\/b\u003e – suitable for all engine types (EcoBoost V6 \u0026amp; EcoBlue Diesel).\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp data-path-to-node=\"8,1,0\"\u003e\u003cb data-path-to-node=\"8,1,0\" data-index-in-node=\"0\"\u003e2-in-1 protected area:\u003c\/b\u003e Highly effectively protects the sensitive \u003cb data-path-to-node=\"8,1,0\" data-index-in-node=\"48\"\u003eradiator\u003c\/b\u003e and the entire \u003cb data-path-to-node=\"8,1,0\" data-index-in-node=\"75\"\u003esteering gear\u003c\/b\u003e from mechanical damage.\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp data-path-to-node=\"8,2,0\"\u003e\u003cb data-path-to-node=\"8,2,0\" data-index-in-node=\"0\"\u003eLightweight \u0026amp; extremely robust:\u003c\/b\u003e Made from high-quality, \u003cb data-path-to-node=\"8,2,0\" data-index-in-node=\"54\"\u003e6 mm thick aluminum\u003c\/b\u003e. Offers uncompromising stability against brutal impacts from below, without unnecessarily weighing down the performance pickup's chassis.\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp data-path-to-node=\"8,3,0\"\u003e\u003cb data-path-to-node=\"8,3,0\" data-index-in-node=\"0\"\u003eFits with the standard front:\u003c\/b\u003e Specifically designed to harmonize perfectly with the original Raptor bumper.\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp data-path-to-node=\"8,4,0\"\u003e\u003cb data-path-to-node=\"8,4,0\" data-index-in-node=\"0\"\u003eEasy plug-and-play installation:\u003c\/b\u003e No drilling, cutting, or welding on the vehicle required! The included mounting kit exclusively uses the \u003cb data-path-to-node=\"8,4,0\" data-index-in-node=\"148\"\u003eoriginal factory drill holes and threads in the ladder frame\u003c\/b\u003e. Reverting to the factory condition is effortlessly possible at any time.\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3 data-path-to-node=\"10\"\u003e🛠️ Looking for an alternative variant?\u003c\/h3\u003e\n\u003cp data-path-to-node=\"11\"\u003eThis product is optimally adaptable to your needs. Feel free to contact us if you require the following alternative version:\u003c\/p\u003e\n\u003cul data-path-to-node=\"12\"\u003e\n\n\u003cli\u003e\n\n\u003cp data-path-to-node=\"12,0,0\"\u003e\u003cb data-path-to-node=\"12,0,0\" data-index-in-node=\"0\"\u003eIn robust steel:\u003c\/b\u003e Also available as a 4 mm steel variant (article SKU: \u003cb data-path-to-node=\"12,0,0\" data-index-in-node=\"61\"\u003eMO-OP090\u003c\/b\u003e).\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3 data-path-to-node=\"14\"\u003e\u003cb data-path-to-node=\"14\" data-index-in-node=\"0\"\u003eTechnical Data:\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul data-path-to-node=\"15\"\u003e\n\n\u003cli\u003e\n\n\u003cp data-path-to-node=\"15,0,0\"\u003e\u003cb data-path-to-node=\"15,0,0\" data-index-in-node=\"0\"\u003eSuitable for:\u003c\/b\u003e Ford Ranger Raptor (model years 2023+)\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp data-path-to-node=\"15,1,0\"\u003e\u003cb data-path-to-node=\"15,1,0\" data-index-in-node=\"0\"\u003eEngine:\u003c\/b\u003e Compatible with all engine versions\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp data-path-to-node=\"15,2,0\"\u003e\u003cb data-path-to-node=\"15,2,0\" data-index-in-node=\"0\"\u003eProtected area:\u003c\/b\u003e Radiator and steering gear\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp data-path-to-node=\"15,3,0\"\u003e\u003cb data-path-to-node=\"15,3,0\" data-index-in-node=\"0\"\u003eMaterial:\u003c\/b\u003e 6 mm high-strength quality aluminum\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp data-path-to-node=\"15,4,0\"\u003e\u003cb data-path-to-node=\"15,4,0\" data-index-in-node=\"0\"\u003eFront compatibility:\u003c\/b\u003e Fits under the original factory bumper\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp data-path-to-node=\"15,5,0\"\u003e\u003cb data-path-to-node=\"15,5,0\" data-index-in-node=\"0\"\u003eInstallation:\u003c\/b\u003e Directly to existing frame points (screw set included)\u003cb data-path-to-node=\"15,6,0\" data-index-in-node=\"48\"\u003e\u003c\/b\u003e\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp data-path-to-node=\"16\"\u003e\u003cb data-path-to-node=\"16\" data-index-in-node=\"0\"\u003eScope of delivery:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul data-path-to-node=\"17\"\u003e\n\n\u003cli\u003e\n\n\u003cp data-path-to-node=\"17,0,0\"\u003e1x aluminum combination skid plate (radiator\/steering gear)\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp data-path-to-node=\"17,1,0\"\u003e1x vehicle-specific mounting and screw set \u003ci data-path-to-node=\"17,1,0\" data-index-in-node=\"51\"\u003e(Note: Other skid plates visible in the photos for the engine, main transmission, transfer case, or fuel tank are not included in the scope of delivery and are available separately from us).\u003c\/i\u003e\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"MorE 4x4","offers":[{"title":"Default Title","offer_id":54125745307975,"sku":"MO-OPA090","price":449.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0937\/3240\/5575\/files\/aluminiowa-oslona-chlodnicy-i-przekladni-kierowniczej-ford-ranger-raptor-23.jpg?v=1781100055"},{"product_id":"aluminium-unterfahrschutz-motorschutz-vorderachse-ford-ranger-raptor","title":"Aluminum Underbody Protection Engine \u0026 Differential Ford Ranger Raptor from 2023","description":"\u003cp data-path-to-node=\"3\"\u003e\u003cb data-path-to-node=\"3\" data-index-in-node=\"0\"\u003eRobust protection for the heart of the drivetrain – save your Ranger Raptor from expensive underbody damage!\u003c\/b\u003e\u003c\/p\u003e\n\u003cp data-path-to-node=\"4\"\u003eThe \u003cb data-path-to-node=\"4\" data-index-in-node=\"4\"\u003eMorE 4x4 aluminum skid plate\u003c\/b\u003e for the \u003cb data-path-to-node=\"4\" data-index-in-node=\"44\"\u003eFord Ranger Raptor\u003c\/b\u003e (models from model year 2023) offers high-strength, extensive protection for the most important mechanical components of the front drive unit: the \u003cb data-path-to-node=\"4\" data-index-in-node=\"212\"\u003eengine oil pan\u003c\/b\u003e and the \u003cb data-path-to-node=\"4\" data-index-in-node=\"233\"\u003efront axle differential (Most)\u003c\/b\u003e. The Raptor is designed ex-works for brutal off-road use and high speeds in rough terrain. However, sharp rocks, massive tree stumps, hard edges, or bottoming out in deep ruts can irreparably damage the engine or the front axle housing, leading to fatal oil loss and immense repair costs.\u003c\/p\u003e\n\u003cp data-path-to-node=\"5\"\u003eThis vehicle-specific underbody protection was developed precisely for these harsh conditions. Thanks to the well-thought-out design, this skid plate can be \u003cb data-path-to-node=\"5\" data-index-in-node=\"150\"\u003emounted completely independently and separately\u003c\/b\u003e, without the need for the remaining components of the underbody system to be installed.\u003c\/p\u003e\n\u003cblockquote data-path-to-node=\"6\"\u003e\n\n\u003cp data-path-to-node=\"6,0\"\u003e💡 \u003cb data-path-to-node=\"6,0\" data-index-in-node=\"3\"\u003eImportant note on the product images:\u003c\/b\u003e To show you the complete course of the underbody protection on the vehicle, some photos show several skid plates. The scope of delivery of this item only includes the \u003cb data-path-to-node=\"6,0\" data-index-in-node=\"223\"\u003eengine and front axle skid plate\u003c\/b\u003e. The other skid plates (for radiator\/steering, transmission, fuel tank, etc.) are not included in the scope of delivery but can be purchased separately in our shop.\u003c\/p\u003e\n\n\n\u003c\/blockquote\u003e\n\u003ch3 data-path-to-node=\"7\"\u003e\u003cb data-path-to-node=\"7\" data-index-in-node=\"0\"\u003eYour advantages at a glance:\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul data-path-to-node=\"8\"\u003e\n\n\u003cli\u003e\n\n\u003cp data-path-to-node=\"8,0,0\"\u003e\u003cb data-path-to-node=\"8,0,0\" data-index-in-node=\"0\"\u003ePerfectly vehicle-specific:\u003c\/b\u003e Custom-made for the \u003cb data-path-to-node=\"8,0,0\" data-index-in-node=\"52\"\u003eFord Ranger Raptor (from 2023)\u003c\/b\u003e – suitable for all engine variants (EcoBoost V6 \u0026amp; EcoBlue Diesel).\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp data-path-to-node=\"8,1,0\"\u003e\u003cb data-path-to-node=\"8,1,0\" data-index-in-node=\"0\"\u003e2-in-1 protection area:\u003c\/b\u003e Reliably protects the \u003cb data-path-to-node=\"8,1,0\" data-index-in-node=\"34\"\u003eengine oil pan\u003c\/b\u003e and the \u003cb data-path-to-node=\"8,1,0\" data-index-in-node=\"57\"\u003efront axle differential\u003c\/b\u003e from mechanical impacts and deformations.\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp data-path-to-node=\"8,2,0\"\u003e\u003cb data-path-to-node=\"8,2,0\" data-index-in-node=\"0\"\u003eLight \u0026amp; extremely robust:\u003c\/b\u003e Made of high-quality, \u003cb data-path-to-node=\"8,2,0\" data-index-in-node=\"54\"\u003e6 mm thick aluminum\u003c\/b\u003e. This offers the ideal balance of uncompromising stability for tough off-road use and minimal additional weight for the front axle of the performance pickup.\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp data-path-to-node=\"8,3,0\"\u003e\u003cb data-path-to-node=\"8,3,0\" data-index-in-node=\"0\"\u003eEasy plug-and-play installation:\u003c\/b\u003e No drilling, cutting, or welding on the vehicle required! The included mounting kit uses only the \u003cb data-path-to-node=\"8,3,0\" data-index-in-node=\"148\"\u003eoriginal factory drill holes and threads in the ladder frame\u003c\/b\u003e. Reverting to the series condition is possible at any time without problems.\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp data-path-to-node=\"8,4,0\"\u003e\u003cb data-path-to-node=\"8,4,0\" data-index-in-node=\"0\"\u003eHard work in focus:\u003c\/b\u003e The design is specifically engineered for the tough stresses of severe terrain and expeditions – forces are dissipated extensively into the frame.\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3 data-path-to-node=\"10\"\u003e🛠️ Looking for an alternative version?\u003c\/h3\u003e\n\u003cp data-path-to-node=\"11\"\u003eThis product can be optimally adapted to your needs. Please contact us if you require the following alternative version:\u003c\/p\u003e\n\u003cul data-path-to-node=\"12\"\u003e\n\n\u003cli\u003e\n\n\u003cp data-path-to-node=\"12,0,0\"\u003e\u003cb data-path-to-node=\"12,0,0\" data-index-in-node=\"0\"\u003eIn robust steel:\u003c\/b\u003e Also available as a 4 mm steel variant (Item SKU: \u003cb data-path-to-node=\"12,0,0\" data-index-in-node=\"61\"\u003eMO-OP091\u003c\/b\u003e).\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3 data-path-to-node=\"14\"\u003e\u003cb data-path-to-node=\"14\" data-index-in-node=\"0\"\u003eTechnical data:\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul data-path-to-node=\"15\"\u003e\n\n\u003cli\u003e\n\n\u003cp data-path-to-node=\"15,0,0\"\u003e\u003cb data-path-to-node=\"15,0,0\" data-index-in-node=\"0\"\u003eSuitable for:\u003c\/b\u003e Ford Ranger Raptor (model years 2023+)\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp data-path-to-node=\"15,1,0\"\u003e\u003cb data-path-to-node=\"15,1,0\" data-index-in-node=\"0\"\u003eEngine:\u003c\/b\u003e Compatible with all engine versions\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp data-path-to-node=\"15,2,0\"\u003e\u003cb data-path-to-node=\"15,2,0\" data-index-in-node=\"0\"\u003eProtection area:\u003c\/b\u003e Engine (oil pan) and front axle differential\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp data-path-to-node=\"15,3,0\"\u003e\u003cb data-path-to-node=\"15,3,0\" data-index-in-node=\"0\"\u003eMaterial:\u003c\/b\u003e 6 mm high-strength quality aluminum\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp data-path-to-node=\"15,4,0\"\u003e\u003cb data-path-to-node=\"15,4,0\" data-index-in-node=\"0\"\u003eInstallation:\u003c\/b\u003e Directly to existing frame points (screw set included)\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp data-path-to-node=\"16\"\u003e\u003cb data-path-to-node=\"16\" data-index-in-node=\"0\"\u003eScope of delivery:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul data-path-to-node=\"17\"\u003e\n\n\u003cli\u003e\n\n\u003cp data-path-to-node=\"17,0,0\"\u003e1x aluminum combination skid plate (engine\/front axle)\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp data-path-to-node=\"17,1,0\"\u003e1x vehicle-specific mounting and screw set \u003ci data-path-to-node=\"17,1,0\" data-index-in-node=\"51\"\u003e(Note: Other skid plates visible in the photos for the radiator, main transmission, transfer case, or fuel tank are not included and are available separately from us).\u003c\/i\u003e\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"MorE 4x4","offers":[{"title":"Default Title","offer_id":54125745537351,"sku":"MO-OPA091","price":319.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0937\/3240\/5575\/files\/aluminiowa-oslona-silnika-i-mostu-ford-ranger-raptor-23.jpg?v=1781100055"},{"product_id":"aluminium-unterfahrschutz-getriebeschutz-ford-ranger-raptor","title":"Aluminum Underride Guard Transmission Ford Ranger Raptor from 2023","description":"\u003cp data-path-to-node=\"4\"\u003e\u003cb data-path-to-node=\"4\" data-index-in-node=\"0\"\u003eRobust protection for your Ranger Raptor's main gearbox – available for V6 petrol and 4-cylinder diesel!\u003c\/b\u003e\u003c\/p\u003e\n\u003cp data-path-to-node=\"5\"\u003eThe \u003cb data-path-to-node=\"5\" data-index-in-node=\"4\"\u003eMorE 4x4 aluminum transmission skid plate\u003c\/b\u003e for the \u003cb data-path-to-node=\"5\" data-index-in-node=\"52\"\u003eFord Ranger Raptor\u003c\/b\u003e (models from model year 2023 onwards) offers highly effective protection for one of the most important mechanical components on the underside of your performance pickup. The Ranger Raptor is designed ex-factory for brutal off-road use and high speeds in rough terrain. However, during crest crossings, hard impacts on rocks, tree stumps or in deep ruts, the transmission housing is massively endangered. Mechanical damage at this point usually means the immediate end of the journey and results in immense repair costs.\u003c\/p\u003e\n\u003cp data-path-to-node=\"6\"\u003eThis vehicle-specific underride guard reliably closes this critical safety gap on the underbody. Thanks to its well-thought-out design, this skid plate \u003cb data-path-to-node=\"6\" data-index-in-node=\"171\"\u003ecan be installed completely independently and separately\u003c\/b\u003e, without necessarily having to install other plates of the protection system.\u003c\/p\u003e\n\u003cblockquote data-path-to-node=\"7\"\u003e\n\n\u003cp data-path-to-node=\"7,0\"\u003e⚙️ \u003cb data-path-to-node=\"7,0\" data-index-in-node=\"3\"\u003eSimply select the appropriate engine for your Raptor using the variant selection:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul data-path-to-node=\"7,1\"\u003e\n\n\u003cli\u003e\n\n\u003cp data-path-to-node=\"7,1,0,0\"\u003e\u003cb data-path-to-node=\"7,1,0,0\" data-index-in-node=\"0\"\u003e3.0L V6 EcoBoost\u003c\/b\u003e (Petrol)\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp data-path-to-node=\"7,1,1,0\"\u003e\u003cb data-path-to-node=\"7,1,1,0\" data-index-in-node=\"0\"\u003e2.0L EcoBlue\u003c\/b\u003e (Diesel)\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\n\u003c\/blockquote\u003e\n\u003cblockquote data-path-to-node=\"8\"\u003e\n\n\u003cp data-path-to-node=\"8,0\"\u003e💡 \u003cb data-path-to-node=\"8,0\" data-index-in-node=\"3\"\u003eImportant note on product images:\u003c\/b\u003e To show you the complete course of the underride guard on the vehicle, some photos show several protective plates. The scope of delivery of this article includes only the \u003cb data-path-to-node=\"8,0\" data-index-in-node=\"223\"\u003etransmission skid plate\u003c\/b\u003e in the version suitable for your engine. The other protective plates (for cooler, engine, transfer case, etc.) are not included in the scope of delivery but can be purchased separately in our shop.\u003c\/p\u003e\n\n\n\u003c\/blockquote\u003e\n\u003ch3 data-path-to-node=\"9\"\u003e\u003cb data-path-to-node=\"9\" data-index-in-node=\"0\"\u003eYour advantages at a glance:\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul data-path-to-node=\"10\"\u003e\n\n\u003cli\u003e\n\n\u003cp data-path-to-node=\"10,0,0\"\u003e\u003cb data-path-to-node=\"10,0,0\" data-index-in-node=\"0\"\u003ePerfectly vehicle-specific:\u003c\/b\u003e Tailor-made for the \u003cb data-path-to-node=\"10,0,0\" data-index-in-node=\"52\"\u003eFord Ranger Raptor (from 2023)\u003c\/b\u003e – precisely adapted to the respective transmission position of the \u003cb data-path-to-node=\"10,0,0\" data-index-in-node=\"137\"\u003e3.0L V6\u003c\/b\u003e or \u003cb data-path-to-node=\"10,0,0\" data-index-in-node=\"150\"\u003e2.0L Diesel\u003c\/b\u003e.\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp data-path-to-node=\"10,1,0\"\u003e\u003cb data-path-to-node=\"10,1,0\" data-index-in-node=\"0\"\u003eLight \u0026amp; extremely robust:\u003c\/b\u003e Made of high-quality, \u003cb data-path-to-node=\"10,1,0\" data-index-in-node=\"54\"\u003e6 mm thick aluminum\u003c\/b\u003e. This offers the ideal balance of uncompromising stability for tough off-road use and minimal additional weight for your Raptor's performance chassis.\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp data-path-to-node=\"10,2,0\"\u003e\u003cb data-path-to-node=\"10,2,0\" data-index-in-node=\"0\"\u003eEasy plug-and-play installation:\u003c\/b\u003e No drilling, cutting or welding on the car! Each protective plate comes with a complete mounting kit that utilizes the \u003cb data-path-to-node=\"10,2,0\" data-index-in-node=\"158\"\u003eoriginal factory drillings and threads in your Ford's ladder frame\u003c\/b\u003e. Reversion to the standard condition is possible at any time without problems.\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp data-path-to-node=\"10,3,0\"\u003e\u003cb data-path-to-node=\"10,3,0\" data-index-in-node=\"0\"\u003eOff-road proven design:\u003c\/b\u003e The development of MorE 4x4 protectors incorporates years of experience in tough terrain. The plates dissipate impact forces broadly into the robust frame and reliably prevent damage from hard impacts.\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3 data-path-to-node=\"12\"\u003e\u003cb data-path-to-node=\"12\" data-index-in-node=\"0\"\u003eTechnical data:\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul data-path-to-node=\"13\"\u003e\n\n\u003cli\u003e\n\n\u003cp data-path-to-node=\"13,0,0\"\u003e\u003cb data-path-to-node=\"13,0,0\" data-index-in-node=\"0\"\u003eSuitable for:\u003c\/b\u003e Ford Ranger Raptor (model years 2023+)\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp data-path-to-node=\"13,1,0\"\u003e\u003cb data-path-to-node=\"13,1,0\" data-index-in-node=\"0\"\u003eEngine:\u003c\/b\u003e Selectable for 3.0L V6 EcoBoost or 2.0L EcoBlue Diesel\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp data-path-to-node=\"13,2,0\"\u003e\u003cb data-path-to-node=\"13,2,0\" data-index-in-node=\"0\"\u003eProtection area:\u003c\/b\u003e Main gearbox \/ transmission housing\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp data-path-to-node=\"13,3,0\"\u003e\u003cb data-path-to-node=\"13,3,0\" data-index-in-node=\"0\"\u003eMaterial:\u003c\/b\u003e 6 mm high-strength quality aluminum\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp data-path-to-node=\"13,4,0\"\u003e\u003cb data-path-to-node=\"13,4,0\" data-index-in-node=\"0\"\u003eMounting:\u003c\/b\u003e Directly to existing frame points (screw set included)\u003cb data-path-to-node=\"13,6,0\" data-index-in-node=\"39\"\u003e\u003c\/b\u003e\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp data-path-to-node=\"14\"\u003e\u003cb data-path-to-node=\"14\" data-index-in-node=\"0\"\u003eScope of delivery:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul data-path-to-node=\"15\"\u003e\n\n\u003cli\u003e\n\n\u003cp data-path-to-node=\"15,0,0\"\u003e1x aluminum transmission skid plate (suitable for the selected engine variant)\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp data-path-to-node=\"15,1,0\"\u003e1x vehicle-specific mounting and screw set \u003ci data-path-to-node=\"15,1,0\" data-index-in-node=\"51\"\u003e(Note: Other protective plates for cooler, engine or transfer case visible in the photos are not included in the scope of delivery and are available separately from us).\u003c\/i\u003e\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"MorE 4x4","offers":[{"title":"3.0L V6 EcoBoost (Petrol)","offer_id":54134864412999,"sku":"MO-OPA092","price":319.95,"currency_code":"EUR","in_stock":true},{"title":"2.0L EcoBlue (Diesel)","offer_id":54134864445767,"sku":"OPA107","price":319.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0937\/3240\/5575\/files\/aluminiowa-oslona-skrzyni-biegow-ford-ranger-raptor-23-30l-v6.jpg?v=1781100056"},{"product_id":"aluminium-unterfahrschutz-motorschutz-ford-ranger-t6-t7-t8","title":"Aluminum Underrun Protection Engine \u0026 Axle Ford Ranger 2011-2022","description":"\u003cp data-path-to-node=\"3\"\u003e\u003cb data-path-to-node=\"3\" data-index-in-node=\"0\"\u003eExtensive front protection for your Ranger – ready for hard work, expeditions, and rough terrain!\u003c\/b\u003e\u003c\/p\u003e\n\u003cp data-path-to-node=\"4\"\u003eThe \u003cb data-path-to-node=\"4\" data-index-in-node=\"4\"\u003eMorE 4x4 aluminum skid plate\u003c\/b\u003e for the \u003cb data-path-to-node=\"4\" data-index-in-node=\"44\"\u003eFord Ranger\u003c\/b\u003e seamlessly covers the entire front underbody section of the popular \u003cb data-path-to-node=\"4\" data-index-in-node=\"133\"\u003eT6 (PX1), T7 (PX2), and T8 (PX3) platforms\u003c\/b\u003e from model years 2011 to 2022. Anyone driving a Ranger off-road, on expeditions, or for demanding work in forests or on construction sites risks costly damage: sharp rocks, thick tree stumps, or deep ruts can severely damage the engine oil pan, the front differential (front axle), and the sensitive steering linkage.\u003c\/p\u003e\n\u003cp data-path-to-node=\"5\"\u003eThis vehicle-specific combination underbody protection covers all these critical areas in a single, massive plate. Thanks to its well-thought-out design, this skid plate \u003cb data-path-to-node=\"5\" data-index-in-node=\"178\"\u003ecan be mounted completely independently and separately\u003c\/b\u003e, without the need for additional underbody system plates to be installed. A major advantage: The plate fits both under the original factory front bumper and under the MorE 4x4 off-road steel bumper.\u003c\/p\u003e\n\u003cblockquote data-path-to-node=\"6\"\u003e\n\n\u003cp data-path-to-node=\"6,0\"\u003e💡 \u003cb data-path-to-node=\"6,0\" data-index-in-node=\"3\"\u003eImportant note on the product images:\u003c\/b\u003e To show you the complete course of the underbody protection on the vehicle, some photos depict several skid plates. The scope of delivery of this item includes only the front \u003cb data-path-to-node=\"6,0\" data-index-in-node=\"231\"\u003eengine skid plate (incl. protection for axle \u0026amp; linkage)\u003c\/b\u003e. The other skid plates (for transmission, transfer case, etc.) are not included in the scope of delivery but can be purchased separately in our shop.\u003c\/p\u003e\n\n\n\u003c\/blockquote\u003e\n\u003ch3 data-path-to-node=\"7\"\u003e\u003cb data-path-to-node=\"7\" data-index-in-node=\"0\"\u003eYour advantages at a glance:\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul data-path-to-node=\"8\"\u003e\n\n\u003cli\u003e\n\n\u003cp data-path-to-node=\"8,0,0\"\u003e\u003cb data-path-to-node=\"8,0,0\" data-index-in-node=\"0\"\u003eComprehensive vehicle compatibility:\u003c\/b\u003e Custom-made for the \u003cb data-path-to-node=\"8,0,0\" data-index-in-node=\"59\"\u003eFord Ranger T6, T7, and T8 (model years 2011–2022)\u003c\/b\u003e – compatible with all engine versions (e.g., 2.2 TDCi, 3.2 TDCi, and 2.0 EcoBlue Bi-Turbo).\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp data-path-to-node=\"8,1,0\"\u003e\u003cb data-path-to-node=\"8,1,0\" data-index-in-node=\"0\"\u003e3-in-1 protection area:\u003c\/b\u003e Reliably protects the \u003cb data-path-to-node=\"8,1,0\" data-index-in-node=\"46\"\u003eengine (oil pan)\u003c\/b\u003e, the \u003cb data-path-to-node=\"8,1,0\" data-index-in-node=\"67\"\u003efront axle differential\u003c\/b\u003e, and the complete \u003cb data-path-to-node=\"8,1,0\" data-index-in-node=\"112\"\u003esteering linkage\u003c\/b\u003e from mechanical damage.\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp data-path-to-node=\"8,2,0\"\u003e\u003cb data-path-to-node=\"8,2,0\" data-index-in-node=\"0\"\u003eLightweight \u0026amp; extremely robust:\u003c\/b\u003e Made from high-quality, \u003cb data-path-to-node=\"8,2,0\" data-index-in-node=\"54\"\u003e6 mm thick aluminum\u003c\/b\u003e. This offers uncompromising stability for tough off-road use with minimal additional weight for your front axle.\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp data-path-to-node=\"8,3,0\"\u003e\u003cb data-path-to-node=\"8,3,0\" data-index-in-node=\"0\"\u003eMaximum bumper compatibility:\u003c\/b\u003e Designed for seamless installation directly under the \u003cb data-path-to-node=\"8,3,0\" data-index-in-node=\"90\"\u003eoriginal front bumper\u003c\/b\u003e and perfectly fitting in combination with the \u003cb data-path-to-node=\"8,3,0\" data-index-in-node=\"166\"\u003eMorE 4x4 steel bumper (MO-Z033)\u003c\/b\u003e.\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp data-path-to-node=\"8,4,0\"\u003e\u003cb data-path-to-node=\"8,4,0\" data-index-in-node=\"0\"\u003eEasy plug-and-play installation:\u003c\/b\u003e No drilling, cutting, or welding required! The skid plate exclusively uses the \u003cb data-path-to-node=\"8,4,0\" data-index-in-node=\"119\"\u003eoriginal factory drilled holes and threads in the vehicle frame\u003c\/b\u003e. Reversion to the standard condition is easily possible at any time.\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3 data-path-to-node=\"14\"\u003e\u003cb data-path-to-node=\"14\" data-index-in-node=\"0\"\u003eTechnical Data:\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul data-path-to-node=\"15\"\u003e\n\n\u003cli\u003e\n\n\u003cp data-path-to-node=\"15,0,0\"\u003e\u003cb data-path-to-node=\"15,0,0\" data-index-in-node=\"0\"\u003eSuitable for:\u003c\/b\u003e Ford Ranger (T6 \/ T7 \/ T8 series – PX1, PX2, PX3)\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp data-path-to-node=\"15,1,0\"\u003e\u003cb data-path-to-node=\"15,1,0\" data-index-in-node=\"0\"\u003eModel Years:\u003c\/b\u003e 2011–2022\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp data-path-to-node=\"15,2,0\"\u003e\u003cb data-path-to-node=\"15,2,0\" data-index-in-node=\"0\"\u003eEngine:\u003c\/b\u003e Compatible with all engine versions\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp data-path-to-node=\"15,3,0\"\u003e\u003cb data-path-to-node=\"15,3,0\" data-index-in-node=\"0\"\u003eProtection area:\u003c\/b\u003e Engine, front axle differential, steering linkage\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp data-path-to-node=\"15,4,0\"\u003e\u003cb data-path-to-node=\"15,4,0\" data-index-in-node=\"0\"\u003eMaterial:\u003c\/b\u003e 6 mm high-strength quality aluminum\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp data-path-to-node=\"15,5,0\"\u003e\u003cb data-path-to-node=\"15,5,0\" data-index-in-node=\"0\"\u003eFront compatibility:\u003c\/b\u003e Suitable for standard bumper \u0026amp; MorE 4x4 steel bumper MO-Z033\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp data-path-to-node=\"15,6,0\"\u003e\u003cb data-path-to-node=\"15,6,0\" data-index-in-node=\"0\"\u003eInstallation:\u003c\/b\u003e Directly to existing frame points (screw set included)\u003cb data-path-to-node=\"15,7,0\" data-index-in-node=\"35\"\u003e\u003c\/b\u003e\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp data-path-to-node=\"16\"\u003e\u003cb data-path-to-node=\"16\" data-index-in-node=\"0\"\u003eScope of delivery:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul data-path-to-node=\"17\"\u003e\n\n\u003cli\u003e\n\n\u003cp data-path-to-node=\"17,0,0\"\u003e1x aluminum combination skid plate (engine\/axle\/steering)\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp data-path-to-node=\"17,1,0\"\u003e1x vehicle-specific mounting and screw set \u003ci data-path-to-node=\"17,1,0\" data-index-in-node=\"51\"\u003e(Note: Other skid plates visible in the photos for transmission, transfer case, or fuel tank are not included in the scope of delivery and are available separately from us).\u003c\/i\u003e\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"MorE 4x4","offers":[{"title":"Default Title","offer_id":54125746684231,"sku":"MO-OPA041","price":439.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0937\/3240\/5575\/files\/aluminiowa-oslona-podwozia-silnika-ford-ranger-2011-2022.jpg?v=1781100059"},{"product_id":"aluminium-unterfahrschutz-getriebe-verteilergetriebe-ford-ranger-t6-t7-t8","title":"Aluminum Underbody Skid Plate Transmission \u0026 Transfer Case Ford Ranger 2011-2022","description":"\u003cp\u003e\u003cb\u003eComfortable combination protection for drive and all-wheel drive – the perfect safeguard for your Ford Ranger!\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThe \u003cb\u003eMorE 4x4 aluminum skid plate\u003c\/b\u003e for the \u003cb\u003emain gearbox and transfer case\u003c\/b\u003e of the \u003cb\u003eFord Ranger\u003c\/b\u003e protects the mechanical heart of your all-wheel drive. As these two components are located relatively centrally under the vehicle, they are extremely vulnerable when driving over crests, in rough terrain, or during daily work in forestry and on construction sites. Impact with a sharp-edged rock or a massive tree stump can quickly lead to costly housing damage, oil loss, and the immediate end of the journey.\u003c\/p\u003e\n\u003cp\u003eThis vehicle-specific combination underbody protection efficiently covers both gearbox areas in a single component and is suitable for the \u003cb\u003eT6 (PX1), T7 (PX2), and T8 (PX3)\u003c\/b\u003e platforms from model years 2011 to 2022. Thanks to its well-thought-out design, this skid plate can be \u003cb\u003emounted completely independently and separately\u003c\/b\u003e, without the need for other plates of the underbody system to be installed.\u003c\/p\u003e\n\u003cblockquote\u003e\n\n\u003cp\u003e💡 \u003cb\u003eImportant note regarding product images:\u003c\/b\u003e To show you the full extent of the underbody protection on the vehicle, some photos depict multiple skid plates. The scope of delivery for this item includes only the combined \u003cb\u003egearbox and transfer case skid plate\u003c\/b\u003e. The other skid plates (for front engine protection or the fuel tank) are not included in the scope of delivery but can be purchased separately in our shop.\u003c\/p\u003e\n\n\n\u003c\/blockquote\u003e\n\u003ch3\u003e\u003cb\u003eYour advantages at a glance:\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003eComprehensive vehicle compatibility:\u003c\/b\u003e Custom-made for the \u003cb\u003eFord Ranger T6, T7, and T8 (model years 2011–2022)\u003c\/b\u003e – compatible with all engine versions (e.g., 2.2 TDCi, 3.2 TDCi, and 2.0 EcoBlue Bi-Turbo) and cabin variants.\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003e2-in-1 protection area:\u003c\/b\u003e Reliably covers both the \u003cb\u003emain gearbox\u003c\/b\u003e and the underlying \u003cb\u003etransfer case\u003c\/b\u003e.\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003eLight \u0026amp; extremely robust:\u003c\/b\u003e Made from high-quality, \u003cb\u003e6 mm thick aluminum\u003c\/b\u003e. This offers the ideal balance of uncompromising stability for tough off-road use and minimal additional weight for your chassis.\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003eEasy plug-and-play installation:\u003c\/b\u003e No drilling, cutting, or welding on the car! Each skid plate comes with a complete mounting kit that utilizes the \u003cb\u003eoriginal factory drilled holes and threads in your Ranger's ladder frame\u003c\/b\u003e. Reversion to the factory condition is possible at any time without problems.\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003eOff-road tested construction:\u003c\/b\u003e Years of experience in tough terrain go into the development of MorE 4x4 protectors. They dissipate impact forces over a large area and reliably prevent mechanical damage to the underbody.\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eTechnical data:\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003eSuitable for:\u003c\/b\u003e Ford Ranger (T6 \/ T7 \/ T8 series – PX1, PX2, PX3)\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003eModel years:\u003c\/b\u003e 2011–2022\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003eEngine:\u003c\/b\u003e Compatible with all engine versions\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003eProtection area:\u003c\/b\u003e Main gearbox and transfer case\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003eMaterial:\u003c\/b\u003e 6 mm high-strength quality aluminum\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003eMounting:\u003c\/b\u003e Directly to existing frame points (screw set included in delivery)\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eScope of delivery:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e1x Aluminum combination skid plate (gearbox\/transfer case)\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e1x Vehicle-specific mounting and screw set \u003ci\u003e(Note: Other skid plates visible in the photos for the engine or tank are not included in the scope of delivery and are available separately from us).\u003c\/i\u003e\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"MorE 4x4","offers":[{"title":"Default Title","offer_id":54125746913607,"sku":"MO-OPA042","price":399.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0937\/3240\/5575\/files\/aluminiowa-oslona-podwozia-skrzyni-biegow-i-reduktora-ford-ranger-2011-2022.jpg?v=1781100060"},{"product_id":"tahl-unterfahrschutz-kuehler-lenkgetriebe-ford-ranger-raptor","title":"Steel Underrun Protection Radiator \u0026 Steering Ford Ranger Raptor from 2023","description":"\u003cp\u003e\u003cb\u003eExtremely robust front underbody protection made of black steel – Highly effectively secures your Ranger Raptor's main radiators and delicate steering gear under the standard front!\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThe \u003cb\u003eMorE 4x4 Steel Combination Skid Plate\u003c\/b\u003e for the \u003cb\u003eFord Ranger Raptor (model series from 2023 \/ Next-Gen)\u003c\/b\u003e offers high-strength, extensive protection for two of the most exposed mechanical components at the front of your performance pickup. This skid plate specifically covers two essential components simultaneously: the \u003cb\u003eradiator assembly (incl. intercooler and water cooler)\u003c\/b\u003e and the vulnerable \u003cb\u003esteering gear\u003c\/b\u003e.\u003c\/p\u003e\u003c!--nl传来\u003e\u003cp\u003eThe Ranger Raptor is built for high-speed off-road use and tough terrain right from the factory. However, those who drive the vehicle uncompromisingly off paved roads, in deep ruts, on rocky trails or in forestry operations expose the low-lying front end to enormous risks. When hitting hard or breaking through in rough terrain, the front is unprotected. An careless impact against sharp rocks, hidden tree stumps in the undergrowth or thick branches can deform the sensitive steering gear or puncture the radiator fins. A damaged radiator leads to immediate coolant loss and capital engine damage, while a defective steering gear immediately makes the vehicle inoperable.\u003c\/p\u003e\n\u003cp\u003eThis vehicle-specific combination underbody protection perfectly closes this critical safety gap at the front of your Raptor. It is specially designed to fit \u003cb\u003eseamlessly under the original factory bumper\u003c\/b\u003e. Thanks to its well-thought-out design, this skid plate can also be \u003cb\u003emounted completely independently and separately\u003c\/b\u003e, without necessarily requiring the installation of the remaining plates of the rear underbody system.\u003c\/p\u003e\n\u003cblockquote\u003e\n\n\u003cp\u003e💡 \u003cb\u003eImportant note on the product images:\u003c\/b\u003e To show you the full extent of the underbody protection on the vehicle, some photos show multiple skid plates. The scope of delivery of this item includes only the front \u003cb\u003eradiator and steering gear skid plate\u003c\/b\u003e. The other skid plates (for engine, transmission or transfer case) are not included, but can be purchased separately in our shop.\u003c\/p\u003e\n\n\n\u003c\/blockquote\u003e\n\u003ch3\u003e\u003cb\u003eYour advantages at a glance:\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003ePerfectly vehicle-specific:\u003c\/b\u003e Tailor-made for the \u003cb\u003eFord Ranger Raptor (from model year 2023)\u003c\/b\u003e – suitable for all engine variants (such as the 3.0L V6 EcoBoost petrol or the 2.0L Bi-Turbo diesel).\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003e2-in-1 protection area:\u003c\/b\u003e Highly effectively secures the sensitive \u003cb\u003ecooling systems\u003c\/b\u003e and the \u003cb\u003esteering gear\u003c\/b\u003e against frontal impacts, groundings and foreign objects from below.\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003eSuitable for the standard front:\u003c\/b\u003e Specially designed to perfectly harmonize with the original Raptor factory bumper.\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003eUncompromising steel toughness:\u003c\/b\u003e Made from \u003cb\u003e4 mm thick quality steel\u003c\/b\u003e. For maximum corrosion protection during tough off-road use, the plate is \u003cb\u003etwo-layer black powder-coated\u003c\/b\u003e.\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003eEasy plug-and-play installation:\u003c\/b\u003e No drilling, cutting or welding on the vehicle necessary! The included mounting kit uses only the \u003cb\u003eoriginal factory drilled holes and threads on the vehicle frame\u003c\/b\u003e. Reverting to the standard condition is possible at any time without problems.\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003e🛠️ Alternative version in the shop:\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003eIn lightweight aluminum:\u003c\/b\u003e This product is also available in the shop as a weight-optimized 6 mm aluminum version under the item SKU: \u003cb\u003eMO-OPA090\u003c\/b\u003e.\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eTechnical data:\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003eSuitable for:\u003c\/b\u003e Ford Ranger Raptor (models from model year 2023)\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003eEngineization:\u003c\/b\u003e All engine versions\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003eProtection area:\u003c\/b\u003e Main radiator and steering gear\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003eMaterial:\u003c\/b\u003e 4 mm high-strength quality steel\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003eSurface:\u003c\/b\u003e Two-layer powder coating, color: Black\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003eFront compatibility:\u003c\/b\u003e Fits under the original factory bumper\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003eMounting:\u003c\/b\u003e Directly to existing frame points (screw set included in scope of delivery)\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eScope of delivery:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e1x steel combination skid plate (radiator\/steering gear)\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e1x vehicle-specific mounting and screw set \u003ci\u003e(Note: Other skid plates visible in the photos for engine or transmission are not included and are available separately from us).\u003c\/i\u003e\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"MorE 4x4","offers":[{"title":"Default Title","offer_id":54125764837703,"sku":"MO-OP090","price":499.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0937\/3240\/5575\/files\/stalowa-oslona-chlodnicy-i-przekladni-kierowniczej-ford-ranger-raptor-23.jpg?v=1781100128"},{"product_id":"stahl-unterfahrschutz-motor-ford-ranger-raptor","title":"Steel Underbody Protection Engine Ford Ranger Raptor from 2023","description":"\u003cp\u003e\u003cb\u003eExtremely robust underbody protection made of black steel – Highly effectively secures your Ranger Raptor's engine oil pan and front axle differential against severe off-road damage!\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThe \u003cb\u003eMorE 4x4 steel combination skid plate\u003c\/b\u003e for the \u003cb\u003eFord Ranger Raptor (model series from 2023 \/ Next-Gen)\u003c\/b\u003e provides high-strength, comprehensive protection for the mechanical heart of your performance pickup. While the foremost radiator section absorbs the initial impact, the engine assembly lies directly behind it and requires uncompromising protection from below during tough off-road use. This skid plate specifically covers two essential components simultaneously: the \u003cb\u003eengine (including oil pan)\u003c\/b\u003e and the \u003cb\u003efront axle differential\u003c\/b\u003e.\u003c\/p\u003e\n\u003cp\u003eThe Ranger Raptor is built for uncompromising high-speed off-road driving and extreme terrain. However, those who operate the vehicle as intended over rocky trails, through deep ruts, or in tough forestry applications expose the underside to enormous risks. Since the Raptor has independent front suspension, the front differential housing is relatively low in the potential impact area due to its design. An careless grounding on sharp-edged rocks, massive tree stumps, or hard impacts on blocked paths can tear open the engine oil pan or damage the differential housing. This leads to immediate oil loss and catastrophic mechanical damage to the engine and drivetrain, resulting in extremely expensive repairs.\u003c\/p\u003e\n\u003cp\u003eThis vehicle-specific combination underbody protection perfectly closes this critical safety gap under your Raptor. Thanks to its thoughtful design, this skid plate can be \u003cb\u003emounted completely independently and separately\u003c\/b\u003e, without necessarily requiring the remaining plates of the front or rear underbody system (such as the radiator or transmission protection) to be installed.\u003c\/p\u003e\n\u003cblockquote\u003e\n\n\u003cp\u003e💡 \u003cb\u003eImportant note on product images:\u003c\/b\u003e To show you the complete course of the underbody protection on the vehicle, some photos show several skid plates. The scope of delivery for this item includes only the \u003cb\u003eengine and differential skid plate\u003c\/b\u003e. The other skid plates (for radiator, main transmission, or transfer case) are not included but can be purchased separately in our shop.\u003c\/p\u003e\n\n\n\u003c\/blockquote\u003e\n\u003ch3\u003e\u003cb\u003eYour advantages at a glance:\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003ePerfectly vehicle-specific:\u003c\/b\u003e Tailor-made for the \u003cb\u003eFord Ranger Raptor (from model year 2023)\u003c\/b\u003e – suitable for all engine variants (such as the 3.0L V6 EcoBoost petrol engine or the 2.0L Bi-Turbo diesel).\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003e2-in-1 protection area:\u003c\/b\u003e Highly effectively secures the sensitive \u003cb\u003eengine oil pan\u003c\/b\u003e and the \u003cb\u003efront axle differential\u003c\/b\u003e against hard impacts, grounding, and foreign objects from below.\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003eUncompromising steel toughness:\u003c\/b\u003e Made from \u003cb\u003e4 mm thick quality steel\u003c\/b\u003e. For maximum corrosion protection during tough off-road use, the plate is \u003cb\u003etwo-layer black powder-coated\u003c\/b\u003e.\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003eEasy plug-and-play installation:\u003c\/b\u003e No drilling, cutting, or welding on the vehicle required! The included mounting kit uses only the \u003cb\u003eoriginal factory drilled holes and threads on the vehicle frame\u003c\/b\u003e. Reversion to the series condition is possible at any time without problems.\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003e🛠️ Alternative version in the shop:\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003eIn lightweight aluminum:\u003c\/b\u003e This product is also available in the shop as a weight-optimized 6 mm aluminum variant under the item SKU: \u003cb\u003eMO-OPA091\u003c\/b\u003e.\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eTechnical data:\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003eSuitable for:\u003c\/b\u003e Ford Ranger Raptor (models from model year 2023)\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003eEngine:\u003c\/b\u003e All engine variants\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003eProtection area:\u003c\/b\u003e Engine oil pan and front axle differential\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003eMaterial:\u003c\/b\u003e 4 mm high-strength quality steel\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003eSurface:\u003c\/b\u003e Two-layer powder coating, color: Black\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003eInstallation:\u003c\/b\u003e Directly to existing frame points (screw set included)\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eScope of delivery:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e1x steel combination skid plate (engine\/front axle differential)\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e1x vehicle-specific mounting and screw set \u003ci\u003e(Note: Other skid plates visible in the photos for radiator, main transmission, or transfer case are not included and are available separately from us).\u003c\/i\u003e\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"MorE 4x4","offers":[{"title":"Default Title","offer_id":54125765198151,"sku":"MO-OP091","price":349.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0937\/3240\/5575\/files\/stalowa-oslona-silnika-i-mostu-ford-ranger-raptor-23.jpg?v=1781100128"},{"product_id":"stahl-unterfahrschutz-hauptgetriebe-ford-ranger-raptor","title":"Steel Underride Protection Gearbox Ford Ranger Raptor 2023+","description":"\u003cp\u003e\u003cb\u003eExtremely robust black steel protection for the central control unit of your Next-Gen Raptor – Highly effective protection for the main gearbox against severe off-road damage!\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThe \u003cb\u003eMorE 4x4 Steel Gearbox Skid Plate\u003c\/b\u003e for the \u003cb\u003eFord Ranger Raptor (model series from 2023 \/ Next-Gen)\u003c\/b\u003e provides high-strength protection for one of the most important and expensive mechanical components of your performance pickup. While the front part is usually the focus, the gearbox area in the middle of the vehicle is subjected to extreme stress in rough terrain or during high-speed off-road driving.\u003c\/p\u003e\n\u003cp\u003eThe Ranger Raptor is built for tough off-road use ex works. However, those who drive it uncompromisingly over rocky trails, through deep ruts, over crests or in hard forest use expose the gearbox center to great risks. When driving over blocked paths, hard embankment edges or massive tree stumps, this area is unprotected. If the pickup hits hard here, there is a risk of cracks in the gearbox housing, deformation of the mounts and fatal oil loss - which leads to extremely expensive consequential damage to the automatic control unit.\u003c\/p\u003e\n\u003cp\u003eThis vehicle-specific underbody protection perfectly closes this security gap. The smooth surface also ensures that the vehicle glides over obstacles in an emergency, instead of getting stuck. Thanks to the well-thought-out design, this skid plate \u003cb\u003ecan be mounted completely independently and separately\u003c\/b\u003e, without necessarily having to install the remaining plates of the underbody system (such as the front engine or radiator protection).\u003c\/p\u003e\n\u003cblockquote\u003e\n\n\u003cp\u003e🛠️ \u003cb\u003eImportant note on variant selection (engine type):\u003c\/b\u003e Please select the appropriate engine type for your Ranger Raptor in the selection menu above. The plates differ in their geometry and mounting points for the respective gearbox:\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003e3.0L V6 EcoBoost (petrol)\u003c\/b\u003e\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003e2.0L Bi-Turbo (diesel)\u003c\/b\u003e\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\n\u003c\/blockquote\u003e\n\u003cblockquote\u003e\n\n\u003cp\u003e💡 \u003cb\u003eImportant note on product images:\u003c\/b\u003e To show you the complete course of the underbody protection on the vehicle, some photos show several skid plates. The scope of delivery of this article includes exclusively the \u003cb\u003emain gearbox skid plate\u003c\/b\u003e. The other skid plates (for radiator, engine or transfer case) are not included in the scope of delivery, but can be purchased separately in our shop.\u003c\/p\u003e\n\n\n\u003c\/blockquote\u003e\n\u003ch3\u003e\u003cb\u003eYour advantages at a glance:\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003ePerfectly vehicle-specific:\u003c\/b\u003e Tailor-made for the \u003cb\u003eFord Ranger Raptor (from model year 2023)\u003c\/b\u003e – precisely matched to the respective engine and gearbox variant.\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003eTargeted protection area:\u003c\/b\u003e Shields the \u003cb\u003emain gearbox\u003c\/b\u003e highly effectively against mechanical impacts, bottoming out and deformation from below.\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003eUncompromising steel hardness:\u003c\/b\u003e Made from \u003cb\u003e4 mm thick quality steel\u003c\/b\u003e. For maximum corrosion protection during tough off-road use, the plate is \u003cb\u003etwo-layer black powder-coated\u003c\/b\u003e.\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003eEasy Plug-and-Play installation:\u003c\/b\u003e No drilling, cutting or welding on the vehicle necessary! The included fastening kit uses exclusively the \u003cb\u003eoriginal factory drilled holes and threads on the vehicle frame\u003c\/b\u003e. Reversion to the series condition is easily possible at any time.\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003e🛠️ Alternative versions in aluminum (6 mm) in the shop:\u003c\/h3\u003e\n\u003cp\u003eIf you want to save weight, we also offer this gearbox protection in ultra-robust \u003cb\u003e6 mm aluminum\u003c\/b\u003e as a separate item:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003eFor 3.0L V6 EcoBoost (aluminum 6 mm):\u003c\/b\u003e Item SKU: \u003cb\u003eMO-OPA092\u003c\/b\u003e\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003eFor 2.0L Bi-Turbo Diesel (aluminum 6 mm):\u003c\/b\u003e Item SKU: \u003cb\u003eMO-OPA107\u003c\/b\u003e\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eTechnical data:\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003eSuitable for:\u003c\/b\u003e Ford Ranger Raptor (models from model year 2023, depending on the selected variant)\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003eEngine type:\u003c\/b\u003e 3.0L V6 EcoBoost or 2.0L Bi-Turbo Diesel (please select above)\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003eProtection area:\u003c\/b\u003e Main gearbox\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003eMaterial:\u003c\/b\u003e 4 mm high-strength quality steel\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003eSurface:\u003c\/b\u003e Two-layer powder coating, color: black\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003eInstallation:\u003c\/b\u003e Directly to existing frame points (screw set included)\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eScope of delivery:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e1x steel main gearbox skid plate\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e1x vehicle-specific mounting and screw set \u003ci\u003e(Note: Other skid plates visible in the photos for radiator, engine or transfer case are not included in the scope of delivery and are available separately from us).\u003c\/i\u003e\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"MorE 4x4","offers":[{"title":"3.0L V6 EcoBoost (Petrol)","offer_id":54186240966983,"sku":"MO-OP092","price":349.95,"currency_code":"EUR","in_stock":true},{"title":"2.0L Bi-Turbo (Diesel)","offer_id":54186240999751,"sku":"MO-OP107","price":349.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0937\/3240\/5575\/files\/stalowa-oslona-skrzyni-biegow-ford-ranger-raptor-23-30l-v6.jpg?v=1781100129"},{"product_id":"stahl-unterfahrschutz-motor-differential-ford-ranger-t6-t7-t8","title":"Steel Underrun Protection Engine Ford Ranger 2011-2022","description":"\u003cp\u003e\u003cb\u003eExtremely robust front and underbody protection made of black steel – Highly effectively secures your Ranger's engine, front axle, and steering linkage! Suitable for standard front \u0026amp; MorE 4x4 steel bumper.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThe \u003cb\u003eMorE 4x4 Steel Combination Skid Plate\u003c\/b\u003e for the \u003cb\u003eFord Ranger (PX1, PX2, and PX3 generations)\u003c\/b\u003e offers highly resistant, comprehensive protection for the most vulnerable mechanical components on the underside of the vehicle's front. This skid plate covers three essential components simultaneously: the \u003cb\u003eengine (including oil pan)\u003c\/b\u003e, the \u003cb\u003efront axle differential\u003c\/b\u003e, and the susceptible \u003cb\u003esteering linkage with the tie rods\u003c\/b\u003e.\u003c\/p\u003e\n\u003cp\u003eThe Ford Ranger is valued worldwide as an extremely robust utility vehicle, workhorse, and expedition vehicle. However, those who drive the vehicle appropriately in rough terrain, in forests, on construction sites, or on demanding overland tours quickly reach the limits with the original plastic or thin sheet metal covers. Since the Ranger has independent front suspension, the front differential housing and the sensitive steering components are unprotected in the potential impact area due to their design. Careless grounding on sharp rocks, massive tree stumps, or hard impacts in deep ruts can irreparably bend the tie rods or tear open the engine oil pan – leading to immediate oil loss and catastrophic engine damage.\u003c\/p\u003e\n\u003cp\u003eThis vehicle-specific 3-in-1 underbody protection perfectly closes this critical safety gap on the underside of your pickup. A major advantage of this design: The skid plate can be \u003cb\u003emounted completely independently and separately\u003c\/b\u003e, without necessarily having to install the remaining plates of the underbody system.\u003c\/p\u003e\n\u003cblockquote\u003e\n\n\u003cp\u003e⚠️ \u003cb\u003eExcellent Front Compatibility:\u003c\/b\u003e This skid plate is an absolute all-rounder for the entire Ranger platform from 2011 to 2022. It is specially designed to fit perfectly under both the \u003cb\u003eoriginal factory bumper (standard front)\u003c\/b\u003e and seamlessly under the \u003cb\u003eMorE 4x4 steel front bumper (model MO-Z033)\u003c\/b\u003e. It is suitable for all cab types (Single Cab, Extra Cab, Double Cab) and all engine variants (such as the 2.2 TDCi, 3.2 TDCi, or 2.0 EcoBlue).\u003c\/p\u003e\n\n\n\u003c\/blockquote\u003e\n\u003cblockquote\u003e\n\n\u003cp\u003e💡 \u003cb\u003eImportant note regarding product images:\u003c\/b\u003e To show you the complete course of the underbody protection on the vehicle, some photos show multiple skid plates. The scope of delivery of this item includes only the front \u003cb\u003esteel engine skid plate\u003c\/b\u003e. The other skid plates (for transmission, transfer case, etc.) are not included in the scope of delivery but can be purchased separately in our shop.\u003c\/p\u003e\n\n\n\u003c\/blockquote\u003e\n\u003ch3\u003e\u003cb\u003eYour Advantages at a Glance:\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003ePerfectly vehicle-specific:\u003c\/b\u003e Tailor-made for the \u003cb\u003eFord Ranger T6 \/ T7 \/ T8 (2011–2022)\u003c\/b\u003e – suitable for all facelift generations (PX1, PX2, PX3) and engine variants.\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003e3-in-1 Protection Area:\u003c\/b\u003e Highly effectively secures the \u003cb\u003eengine\u003c\/b\u003e, the \u003cb\u003efront axle differential\u003c\/b\u003e, and the complete \u003cb\u003esteering linkage (tie rods)\u003c\/b\u003e against mechanical impacts and frontal impacts from below.\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003eMaximum Flexibility:\u003c\/b\u003e Compatible with the original factory bumper AND the MorE 4x4 winch bumper Z033.\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003eUncompromising Steel Hardness:\u003c\/b\u003e Made from \u003cb\u003e4 mm thick quality steel\u003c\/b\u003e. For maximum corrosion protection in tough off-road use, the plate is \u003cb\u003edouble-layer black powder-coated\u003c\/b\u003e.\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003eEasy Plug-and-Play Installation:\u003c\/b\u003e No drilling, cutting, or welding on the vehicle required! The included mounting kit uses only the \u003cb\u003eoriginal factory drillings and threads in the massive ladder frame\u003c\/b\u003e. Reversion to the standard condition is possible at any time without problems.\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eTechnical Data:\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003eSuitable for:\u003c\/b\u003e Ford Ranger T6 \/ T7 \/ T8 (model years 2011–2022)\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003eEngine:\u003c\/b\u003e All engine configurations\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003eProtection Area:\u003c\/b\u003e Engine oil pan, front differential, and tie rods\/steering\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003eMaterial:\u003c\/b\u003e 4 mm high-strength quality steel\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003eSurface:\u003c\/b\u003e Double-layer powder coating, Color: Black\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003eFront Compatibility:\u003c\/b\u003e Suitable for original bumper \u0026amp; MorE 4x4 bumper MO-Z033\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003eMounting:\u003c\/b\u003e Directly to existing frame points (screw set included)\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eScope of Delivery:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e1x Steel combination skid plate (engine\/axle bridge\/tie rods)\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e1x Vehicle-specific mounting and screw set \u003ci\u003e(Note: Other skid plates visible in the photos for the main transmission, transfer case, or tank are not included in the scope of delivery and are available separately from us).\u003c\/i\u003e\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"MorE 4x4","offers":[{"title":"Default Title","offer_id":54125766082887,"sku":"MO-OP041","price":489.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0937\/3240\/5575\/files\/stalowa-przednia-oslona-podwozia-silnika-ford-ranger-2011-2022_61fc80c2-e122-406f-9b49-740c88cd281f.jpg?v=1781100132"},{"product_id":"stahl-unterfahrschutz-getriebe-verteilergetriebe-ford-ranger-t6-t7-t8","title":"Steel Underrun Protection Gearbox \u0026 Transfer Case Ford Ranger 2011-2022","description":"\u003cp\u003e\u003cb\u003eExtremely robust protection for your Ranger's gearbox and transfer case made of black steel – Effectively safeguards main gearbox and transfer case from severe off-road damage!\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThe \u003cb\u003eMorE 4x4 Steel Combination Skid Plate\u003c\/b\u003e for the \u003cb\u003eFord Ranger (PX1, PX2, and PX3 generations)\u003c\/b\u003e offers high-strength, extensive protection for two of your pick-up's most important and expensive mechanical components. While the front section is usually the focus, the entire midsection of the vehicle is subjected to extreme stress in rough terrain, on expeditions, or during work.\u003c\/p\u003e\n\u003cp\u003eThe Ford Ranger is valued worldwide as a tireless workhorse, but when driving over crests, rocky forest paths, hard embankment edges, or massive tree stumps in the undergrowth, the vehicle's midsection is unprotected. If the heavy 4x4 hits hard here, cracks or fractures in the main gearbox housing and the sensitive aluminum housing of the transfer case are a risk. The actuators for the 4x4 engagement can also be damaged. The consequence is immediate oil loss, a complete failure of the drivetrain, and extremely expensive repair costs.\u003c\/p\u003e\n\u003cp\u003eThis vehicle-specific combination skid plate perfectly closes this critical safety gap on the underbody of your pick-up. Thanks to its well-thought-out design, this skid plate can be \u003cb\u003emounted completely independently and separately\u003c\/b\u003e, without necessarily having to install the remaining plates of the underbody system (such as the front engine guard).\u003c\/p\u003e\n\u003cblockquote\u003e\n\n\u003cp\u003e⚠️ \u003cb\u003eExcellent Platform Compatibility:\u003c\/b\u003e This skid plate fits universally on the entire Ranger platform from 2011 to 2022. It is optimally suited for all facelift generations (PX1, PX2, PX3), all cabin types (Single Cab, Extra Cab, Double Cab), and all engine variants (such as the 2.2 TDCi, 3.2 TDCi, or 2.0 EcoBlue).\u003c\/p\u003e\n\n\n\u003c\/blockquote\u003e\n\u003cblockquote\u003e\n\n\u003cp\u003e💡 \u003cb\u003eImportant note on product images:\u003c\/b\u003e To show you the complete course of the underbody protection on the vehicle, some photos show the entire underbody system. The scope of delivery of this item includes only the combined \u003cb\u003egearbox and transfer case skid plate\u003c\/b\u003e. The other skid plates (such as for the engine or the tank) are not included but can be purchased separately in our shop.\u003c\/p\u003e\n\n\n\u003c\/blockquote\u003e\n\u003ch3\u003e\u003cb\u003eYour advantages at a glance:\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003ePerfectly vehicle-specific:\u003c\/b\u003e Tailor-made for the \u003cb\u003eFord Ranger T6 \/ T7 \/ T8 (2011–2022)\u003c\/b\u003e – suitable for all model years and engine variants.\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003e2-in-1 protection area:\u003c\/b\u003e Shields both the \u003cb\u003emain gearbox\u003c\/b\u003e (manual or automatic transmission) and the \u003cb\u003etransfer case\u003c\/b\u003e highly effectively from mechanical impacts and hard bottoming out.\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003eUncompromising steel toughness:\u003c\/b\u003e Made from \u003cb\u003e4 mm thick quality steel\u003c\/b\u003e. For maximum corrosion protection in tough off-road use, the plate is \u003cb\u003etwo-layer black powder-coated\u003c\/b\u003e.\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003eEasy Plug-and-Play installation:\u003c\/b\u003e No drilling, cutting, or welding on the vehicle required! The included mounting kit exclusively uses the \u003cb\u003eoriginal factory drilled holes and threads in the solid ladder frame\u003c\/b\u003e. Reverting to the series condition is possible at any time without problems.\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eTechnical data:\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003eSuitable for:\u003c\/b\u003e Ford Ranger T6 \/ T7 \/ T8 (model years 2011–2022)\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003eEngine:\u003c\/b\u003e All engine variants\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003eProtection area:\u003c\/b\u003e Main gearbox and transfer case\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003eMaterial:\u003c\/b\u003e 4 mm high-strength quality steel\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003eSurface:\u003c\/b\u003e Two-layer powder coating, Color: Black\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003eMounting:\u003c\/b\u003e Directly to existing frame points (screw set included in delivery)\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eScope of delivery:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e1x Steel combination skid plate (gearbox\/transfer case)\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e1x vehicle-specific mounting and screw set \u003ci\u003e(Note: Other skid plates for engine or tank visible in the photos are not included and are available separately in our shop).\u003c\/i\u003e\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"MorE 4x4","offers":[{"title":"Default Title","offer_id":54125766902087,"sku":"MO-OP042","price":449.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0937\/3240\/5575\/files\/stalowa-oslona-podwozia-skrzyni-biegow-i-reduktora-ford-ranger-2011-2022_de4c57be-5308-4359-87b8-96a666496523.jpg?v=1781100133"},{"product_id":"aluminium-unterfahrschutz-verteilergetriebe-ford-ranger-raptor","title":"Aluminum Underrun Protection Transfer Case Ford Ranger Raptor from 2023","description":"\u003cp\u003e\u003cb\u003eMaximum protection for your Ranger Raptor's transfer case – the life insurance for the all-wheel drive of V6 petrol and diesel engines!\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThe \u003cb\u003eMorE 4x4 aluminum transfer case skid plate\u003c\/b\u003e for the \u003cb\u003eFord Ranger Raptor\u003c\/b\u003e (models from model year 2023) secures one of the most exposed and important components on the underbody of your performance pickup. The transfer case is located relatively centrally under the vehicle and is particularly vulnerable when cresting, hard impacts on rocks, tree stumps or in deep ruts off-road. Mechanical damage at this point usually means the immediate end of the tour.\u003c\/p\u003e\n\u003cp\u003eThis vehicle-specific underbody protection perfectly covers this critical area. Thanks to its well-thought-out design, this skid plate \u003cb\u003ecan be mounted completely independently and separately\u003c\/b\u003e, without the need for other plates of the underbody system to be installed.\u003c\/p\u003e\n\u003cblockquote\u003e\n\n\u003cp\u003e⚙️ \u003cb\u003eSimply select the appropriate engine for your Raptor using the variant selection:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003e3.0L V6 EcoBoost\u003c\/b\u003e (Petrol)\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003e2.0L EcoBlue\u003c\/b\u003e (Diesel)\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\n\u003c\/blockquote\u003e\n\u003cblockquote\u003e\n\n\u003cp\u003e💡 \u003cb\u003eImportant note on the product images:\u003c\/b\u003e To show you the complete course of the underbody protection on the vehicle, some photos depict several skid plates. The scope of delivery of this item includes exclusively the \u003cb\u003etransfer case skid plate\u003c\/b\u003e in the version suitable for your engine. The other skid plates (for radiator, engine, main gearbox, etc.) are not included in the scope of delivery but can be purchased separately in our shop.\u003c\/p\u003e\n\n\n\u003c\/blockquote\u003e\n\u003ch3\u003e\u003cb\u003eYour advantages at a glance:\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003ePerfectly vehicle-specific:\u003c\/b\u003e Tailor-made for the \u003cb\u003eFord Ranger Raptor (from 2023)\u003c\/b\u003e – precisely adapted to the conditions of the \u003cb\u003e3.0L V6\u003c\/b\u003e or \u003cb\u003e2.0L Diesel\u003c\/b\u003e.\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003eLight \u0026amp; extremely robust:\u003c\/b\u003e Made of high-quality, \u003cb\u003e6 mm thick aluminum\u003c\/b\u003e. This offers the ideal balance of uncompromising stability for tough off-road use and minimal additional weight for your Raptor's performance suspension.\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003eEasy plug-and-play installation:\u003c\/b\u003e No drilling, cutting or welding on the car! Each skid plate comes with a complete mounting kit that uses the \u003cb\u003eoriginal factory drilled holes and threads in your Ford's ladder frame\u003c\/b\u003e. Reverting to the production state is possible at any time without any problems.\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\u003c!--nl--\"\u003e\u003cp\u003e\u003cb\u003eOff-road proven construction:\u003c\/b\u003e Years of experience in tough terrain go into the development of MorE 4x4 protectors. They distribute impact forces over a large area and reliably prevent mechanical damage to the underbody.\u003c\/p\u003e\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eTechnical data:\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003eSuitable for:\u003c\/b\u003e Ford Ranger Raptor (model years 2023+)\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003eEngine:\u003c\/b\u003e Selectable for 3.0L V6 EcoBoost or 2.0L EcoBlue Diesel\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003eProtection area:\u003c\/b\u003e Transfer case\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003eMaterial:\u003c\/b\u003e 6 mm high-strength quality aluminum\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003eMounting:\u003c\/b\u003e Directly to existing frame points (screw set included)\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eScope of delivery:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e1x aluminum transfer case skid plate (suitable for the selected engine variant)\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e1x vehicle-specific mounting and screw set \u003ci\u003e(Note: Other skid plates visible in the photos for radiator, engine or main gearbox are not included in the scope of delivery and are available separately in our shop).\u003c\/i\u003e\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"MorE 4x4","offers":[{"title":"3.0L V6 EcoBoost (Petrol)","offer_id":54135143596359,"sku":"MO-OPA093","price":359.95,"currency_code":"EUR","in_stock":true},{"title":"2.0L EcoBlue (Diesel)","offer_id":54135143629127,"sku":"MO-OPA108","price":359.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0937\/3240\/5575\/files\/aluminiowa-oslona-podwozia-reduktora-ford-ranger-raptor-23-30l-v6_269658d3-cc04-4bda-885f-68b685e6a5be.jpg?v=1781100057"},{"product_id":"aluminium-unterfahrschutz-ford-ranger-raptor-ab-2023-2-0-l-2","title":"Aluminum Underrun Protection Ford Ranger Raptor from 2023, 2.0 l","description":"","brand":"MorE 4x4","offers":[{"title":"Default Title","offer_id":54126166835527,"sku":"MO-OPA108","price":359.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0937\/3240\/5575\/files\/aluminiowa-oslona-podwozia-reduktora-ford-ranger-raptor-23-20l_8ba5b64a-4b83-4aef-a91f-46474fd441d1.jpg?v=1781100058"},{"product_id":"stahl-unterfahrschutz-verteilergetriebe-ford-ranger-raptor","title":"Steel Underride Protection Transfer Case Ford Ranger Raptor 2023+","description":"\u003cp\u003e\u003cb\u003eExtremely robust all-wheel drive protection made of black steel – Highly effectively secures your Next-Gen Raptor's transfer case against harsh off-road damage!\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThe \u003cb\u003eMorE 4x4 Steel Transfer Case Skid Plate\u003c\/b\u003e for the \u003cb\u003eFord Ranger Raptor (model year 2023 onwards \/ Next-Gen)\u003c\/b\u003e offers high-strength protection for one of the most important mechanical components of your all-wheel drive. While the front section is usually protected first, the transfer case is inherently positioned relatively low and unprotected in the middle of the vehicle, above the driveshaft outputs.\u003c\/p\u003e\n\u003cp\u003eThe Ranger Raptor is built for uncompromising performance and tough terrain from the factory. However, those who drive it appropriately over rocky trails, through deep ruts, over crests, or in heavy forestry operations expose the vehicle to extreme dangers, especially in the central underbody area. When driving over crests, hard embankment edges, or massive tree stumps in the undergrowth, the middle of the vehicle is at high risk. If the heavy pickup makes hard contact here, there is a risk of cracks or fractures in the sensitive aluminum housing of the transfer case, damage to the actuator unit for the all-wheel drive control, and fatal oil loss – which immediately cripples the entire all-wheel drive and results in extremely expensive repair costs.\u003c\/p\u003e\n\u003cp\u003eThis vehicle-specific underbody protection perfectly closes this security gap. The smooth surface also ensures that in an emergency, the vehicle glides smoothly over obstacles instead of getting snagged on stones or roots with the frame. Thanks to its well-thought-out design, this skid plate can be \u003cb\u003emounted completely independently and separately\u003c\/b\u003e, without the need for the remaining plates of the underbody system (such as the front engine or radiator protection) to be installed.\u003c\/p\u003e\n\u003cblockquote\u003e\n\n\u003cp\u003e🛠️ \u003cb\u003eImportant note on variant selection (engine type):\u003c\/b\u003e Please select the appropriate engine type for your Ranger Raptor in the selection menu above. The plates differ in their geometry and mounting points for the respective transfer case:\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003e3.0L V6 EcoBoost (Petrol)\u003c\/b\u003e\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003e2.0L Bi-Turbo (Diesel)\u003c\/b\u003e\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\n\u003c\/blockquote\u003e\n\u003cblockquote\u003e\n\n\u003cp\u003e💡 \u003cb\u003eImportant note on product images:\u003c\/b\u003e To show you the full extent of the underbody protection on the vehicle, some photos depict multiple skid plates. The scope of delivery for this item only includes the \u003cb\u003etransfer case skid plate\u003c\/b\u003e. The other skid plates (for radiator, engine, or main gearbox) are not included but can be purchased separately in our shop.\u003c\/p\u003e\n\n\n\u003c\/blockquote\u003e\n\u003ch3\u003e\u003cb\u003eYour advantages at a glance:\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003ePerfectly vehicle-specific:\u003c\/b\u003e Custom-made for the \u003cb\u003eFord Ranger Raptor (from model year 2023)\u003c\/b\u003e – precisely matched to the respective engine and frame geometry.\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003eTargeted protection area:\u003c\/b\u003e Highly effectively shields the sensitive \u003cb\u003etransfer case\u003c\/b\u003e from mechanical impacts, hard bottoming out, and deformations from below.\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003eUncompromising steel hardness:\u003c\/b\u003e Made from \u003cb\u003e4 mm thick quality steel\u003c\/b\u003e. For maximum corrosion protection during harsh off-road use, the plate is \u003cb\u003etwo-layer black powder-coated\u003c\/b\u003e.\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003eEasy Plug-and-Play Installation:\u003c\/b\u003e No drilling, cutting, or welding on the vehicle required! The included mounting kit exclusively uses the \u003cb\u003eoriginal factory holes and threads on the vehicle frame\u003c\/b\u003e. Reversion to the standard condition is possible at any time without problems.\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003e🛠️ Alternative aluminum versions (6 mm) in the shop:\u003c\/h3\u003e\n\u003cp\u003eIf you want to save weight, we also offer this transfer case protection in ultra-robust \u003cb\u003e6 mm aluminum\u003c\/b\u003e as a separate item:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003eFor 3.0L V6 EcoBoost (Aluminum 6 mm):\u003c\/b\u003e Item SKU: \u003cb\u003eMO-OPA093\u003c\/b\u003e\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003eFor 2.0L Bi-Turbo Diesel (Aluminum 6 mm):\u003c\/b\u003e Item SKU: \u003cb\u003eMO-OPA108\u003c\/b\u003e\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eTechnical data:\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003eSuitable for:\u003c\/b\u003e Ford Ranger Raptor (models from model year 2023, depending on the selected variant)\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003eEngine type:\u003c\/b\u003e 3.0L V6 EcoBoost or 2.0L Bi-Turbo Diesel (please select above)\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003eProtection area:\u003c\/b\u003e Transfer case\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003eMaterial:\u003c\/b\u003e 4 mm high-strength quality steel\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003eSurface:\u003c\/b\u003e Two-layer powder coating, Color: Black\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003eMounting:\u003c\/b\u003e Directly to existing frame points (screw set included)\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eScope of delivery:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e1x Steel Transfer Case Skid Plate\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e1x vehicle-specific mounting and screw set \u003ci\u003e(Note: Other skid plates visible in the photos for radiator, engine, or gearbox are not included and are available separately from us).\u003c\/i\u003e\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"MorE 4x4","offers":[{"title":"3.0L V6 EcoBoost (Petrol)","offer_id":54186250305863,"sku":"MO-OP093","price":399.95,"currency_code":"EUR","in_stock":true},{"title":"2.0L Bi-Turbo (Diesel)","offer_id":54186250338631,"sku":"MO-OP108","price":399.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0937\/3240\/5575\/files\/stalowa-oslona-podwozia-reduktora-ford-ranger-raptor-23-30l-v6_5e99a661-edf4-4ebb-b56f-8b627b3fb2d6.jpg?v=1781100130"},{"product_id":"stahl-heckstossstange-ford-ranger-2011-2022","title":"Steel Rear Bumper Ford Ranger 2011 - 2022","description":"\u003cp\u003eWhen the Ford Ranger needs to get serious off-road, the rear is often the first point of attack for damage: steep descents, hard edges, deep articulation, and hidden obstacles on the ground mercilessly punish the stock bodywork. This is precisely where the MorE 4x4 steel rear bumper plays to its strengths, reliably protecting the rear area from expensive damage to the body, valance panel, and taillights – where a single uncontrolled contact can quickly lead to four-figure repair costs. The massive construction is designed for tough use in heavy-duty off-roaders and overland setups, providing significantly more reserves in blocked passages, ruts, and abrupt groundings.\u003c\/p\u003e\n\u003cp\u003eMade from high-strength steel with material thicknesses of 6, 4, and 3 mm, this off-road rear bumper offers the robust substance that counts in expedition and everyday work. The precise three-point adjustment in three planes significantly simplifies installation and ensures clean, stress-free positioning on the vehicle. Additionally, MorE 4x4 integrates a mount for the rear fog light and reinforced attachment points for recovery shackles, ensuring that the Ranger is not only protected but also consistently recoverable.\u003c\/p\u003e\n\u003cp\u003eThe surface is also uncompromisingly designed for long-term durability: shot blasting, arc-sprayed zinc coating, and subsequent powder coating with Sahara polyester form an extremely durable corrosion and stone chip protection. The whole is refined by the black textured paint in a fine crack look, which not only convinces technically but also gives the Ranger's rear a characteristic, professional off-road look. Practical note: The bumper is delivered without holes for parking sensors; these must be drilled by yourself if required.\u003c\/p\u003e\n\u003ch3\u003eTechnical Details \/ Product Features\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eSuitable for:\u003c\/strong\u003e Ford Ranger T6, T7, and T8, model years 2011–2022, all engine variants\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eVersion:\u003c\/strong\u003e Steel rear bumper for tough off-road and expedition use\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eMaterial thicknesses:\u003c\/strong\u003e 6 mm, 4 mm, and 3 mm\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Three-point adjustment in three planes for precise and simplified installation\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eLight mount:\u003c\/strong\u003e Integrated holder for the rear fog light\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eRecovery hardware:\u003c\/strong\u003e Reinforced attachment points for shackles\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eParking sensors:\u003c\/strong\u003e No pre-drilled holes; sensor openings must be made by yourself if required\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eSurface preparation:\u003c\/strong\u003e Shot blasting for optimal adhesion and increased surface quality\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCorrosion protection:\u003c\/strong\u003e Arc-sprayed zinc coating\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCoating:\u003c\/strong\u003e Sahara polyester powder coating with increased abrasion resistance\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Black textured paint in a fine crack look\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eImportant Registration Note\u003c\/h3\u003e\n\u003cp\u003ePlease note: This off-road bumper does not have a general operating permit (ABE), no TÜV parts certificate, and no regular road approval under German road traffic licensing regulations (StVZO). If the vehicle is to be driven on public roads, a potential individual approval (pursuant to § 21 StVZO) must be clarified individually with the respective TÜV, Dekra, or KÜS inspector on site BEFORE purchase.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eAn optional spare tire carrier can be mounted: MO-\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eZ004\u003c\/span\u003e\u003c\/p\u003e","brand":"MorE 4x4","offers":[{"title":"No \/ No","offer_id":54252850020679,"sku":"MO-Z034","price":1039.95,"currency_code":"EUR","in_stock":true},{"title":"No \/ Yes","offer_id":54254119256391,"sku":"MO-Z034-1","price":1139.95,"currency_code":"EUR","in_stock":true},{"title":"Yes \/ No","offer_id":54252850053447,"sku":"MO-Z034-2","price":1109.95,"currency_code":"EUR","in_stock":true},{"title":"Yes \/ Yes","offer_id":54254119289159,"sku":"MO-Z034-3","price":1209.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0937\/3240\/5575\/files\/zderzak-tylny-stalowy-ford-ranger-2011-2022-more-4x4_3fa4fd64-9ded-475a-9c52-c40489822d09.jpg?v=1782740193"}],"url":"https:\/\/overlanding-gear.us\/en\/collections\/ranger.oembed","provider":"Overlanding Gear","version":"1.0","type":"link"}