Aluminum Underrun Protection Gearbox Toyota Land Cruiser J90 J95

• Toyota

• Land Cruiser 90
• Land Cruiser 95

Robust protection for the 90/95 main gearbox – secures your off-roader's gearbox housing highly effectively!

The MorE 4x4 aluminum gearbox skid plate for the Toyota Land Cruiser J90 (three-door) and J95 (five-door) model years 1996 to 2002 offers high-strength protection for the mechanical center of your vehicle. Since the main gearbox is located relatively centrally under the vehicle, it is particularly vulnerable when crossing crests, hitting rocks, tree stumps or sliding over deep ruts in off-road terrain. A mechanical impact can quickly lead to cracks in the housing, fatal oil loss and extremely expensive gearbox damage that will immediately end your tour.

This vehicle-specific underbody protection reliably closes this critical safety gap in the underbody. To guarantee an absolute perfect fit at the original frame points, the product can be perfectly adapted to your engine.

⚠️ Important installation note: Please note that a suitable front MorE 4x4 engine skid plate must be installed on the vehicle for the professional installation of this gearbox skid plate (compatible models: MO-OPA013 or MO-OPA044). The gearbox skid plate is attached to the rear mounting points of the engine skid plate.

💡 Important note on product images: To show you the full course of the underbody protection on the vehicle, some photos show several skid plates. Only the gearbox skid plate is included in the scope of delivery of this article. The necessary front engine skid plate and other plates (transfer case, tank, etc.) are not included in the scope of delivery, but can be purchased separately in our shop.

⚙️ Please select your variant:

Simply select the appropriate engine for your Land Cruiser from the selection menu:

• Variant 1: For diesel engines (e.g. 3.0 TD / 3.0 D-4D)

• Variant 2: For petrol engines (e.g. 3.4L V6)

Your advantages at a glance:

• Perfectly vehicle-specific: Custom-made for the Toyota Land Cruiser J90 / J95 (1996–2002) – precisely adapted to the geometry of the respective gearbox version (manual/automatic) of diesel and petrol models.

• Light & extremely robust: Made of high-quality, 6 mm thick aluminum. This offers the ideal balance of uncompromising stability for tough off-road use and minimal additional weight for the suspension of your SUV.

• Easy plug-and-play installation: No drilling, cutting or welding on the car! The included fastening kit uses the original factory drilled holes and threads in the ladder frame in conjunction with the MorE 4x4 engine skid plate. Reverting to the series condition is possible at any time without any problems.

• Off-road proven construction: The smooth surface ensures that the vehicle can slide over obstacles in an emergency, instead of getting stuck on the gearbox housing.

🛠️ Looking for alternative material variants?

The MorE 4x4 product range offers the right material for every application. Please contact us if you need the following alternative versions in steel or cannot find them in the shop:

• Diesel models in steel: Robust 4 mm steel sheet (Article SKU: MO-OP014)

• Petrol models in steel: Robust 4 mm steel sheet (Article SKU: MO-OP074)

Technical data:

• Suitable for: Toyota Land Cruiser J90 (three-door) & J95 (five-door) – model years 1996–2002

• Protection area: Main gearbox / gearbox housing

• Material: 6 mm high-strength quality aluminum

• Mounting: To existing frame points in conjunction with the front underbody protection (screw set included)

Scope of delivery:

• 1x aluminum gearbox skid plate

• 1x vehicle-specific mounting and screw set (Note: The front engine skid plate required for mounting and other skid plates are available separately).