30-day return policy
Take advantage of our extended return window
Tested fit
We stand behind our products – if it doesn't fit, it goes back.
100% buyer protection
Encrypted purchase process & buyer protection from payment providers.
PU Bushing Set for Ford Maverick (1993–1998)
$178.00
Skip to product information
PU Bushing Set for Ford Maverick (1993–1998)
$178.00
Taxes included.
Shipping calculated at checkout.
Renew the main suspension bushes on your first-generation Ford Maverick and restore more controlled wheel and rear-axle movement. The front control arms, rear control arms and Panhard rod locate the vehicle under braking, cornering and drive forces; soft or worn rubber can allow play to accumulate across these mounting points.
This orange 75 Shore A polyurethane set is designed for road use, overland travel and occasional off-road driving.
Key details
- Fits: Ford Maverick, 1993–1998
- Chassis basis: Mechanically equivalent to the Nissan Terrano II R20
- Material: Polyurethane
- Hardness: 75 Shore A
- Colour: Orange
Kit contents
- Front upper control arms: 4 PU bushes and 4 metal sleeves
- Front lower control arms: 2 PU bushes and 2 metal sleeves
- Frame-side front lower control-arm mounts: 2 PU bushes and 2 metal sleeves
- Rear upper control arms: 4 PU bushes and 4 metal sleeves
- Rear lower control arms: 4 PU bushes and 4 metal sleeves
- Rear Panhard rod: 2 PU bushes and 2 metal sleeves
- Anti-roll-bar link bushes: 8 PU bushes
- Front anti-roll bar: 2 PU bushes
- Rear anti-roll bar: 2 PU bushes
Important installation note
At the front upper control arms, remove only the original rubber. The outer metal shell remains in the control arm and is reused for the PU bush. Inspect all arms, mounts and fasteners for corrosion, wear and deformation before installation.
Choose version
These versions have different hardness levels and recommended uses.