PU Bushing Set for Isuzu Trooper II

• Isuzu

• Trooper 2

Renew the main front- and rear-suspension mounting points on your Isuzu Trooper II and reduce wear-related movement at the control arms, rear axle and anti-roll bars. Soft or worn original rubber can allow additional play under braking, cornering and drive forces.

This orange 75 Shore A polyurethane kit is designed for road use, overland travel and mixed off-road driving.

Key details

• Fits: Isuzu Trooper II, 05/1992–01/1998
• Material: Polyurethane
• Hardness: 75 Shore A
• Colour: Orange
• Metal sleeves and assembly grease: Included

More defined wheel and axle location

Polyurethane deforms less than aged rubber and can help the control arms and rear Panhard rod retain wheel and axle position more consistently. The final result also depends on joints, wheel bearings, dampers and steering components.

Kit contents

• Front lower control arms: 2 PU bushes and 2 metal sleeves
• Frame-side front lower control-arm mounts: 2 PU bushes and 2 metal sleeves
• Front upper control arms: 4 PU bushes
• Rear upper control arms: 2 PU bushes and 2 metal sleeves
• Rear lower control arms: 4 PU bushes and 4 metal sleeves
• Rear Panhard rod: 2 PU bushes and 2 metal sleeves
• Front anti-roll bar: 2 PU bushes
• Rear anti-roll bar: 2 PU bushes
• Rear anti-roll-bar link bushes: 4 PU bushes
• Assembly grease

Installation note

Remove the old bushes completely, clean all mounting surfaces and use the supplied grease. Inspect every arm, bolt and mount for corrosion, wear or deformation.