Eccentric PU Bushing Set for Mercedes G-Class W460 / W461 / W463 with Approx. 50 mm Lift

• Mercedes Benz

• G class

A suspension lift changes the front-axle caster of the Mercedes G-Class, while aged control-arm rubber can allow additional axle movement. This set combines partial caster correction with a complete renewal of the front and rear control-arm bushes.

The orange 75 Shore A polyurethane kit uses eccentric bushes at the axle-side mounts of the front control arms and regular centred bushes at the remaining positions. It is intended for a lift of approximately 50 mm / 2 inches.

Key details

• Fits: Mercedes-Benz G-Class W460, W461 and W463
• Application: Approximately 50 mm / 2 in suspension lift
• Position: Front and rear control arms
• Material: Polyurethane
• Hardness: 75 Shore A
• Colour: Orange
• Assembly grease: Included

Caster correction with eccentric bushes

The offset bore repositions the front axle within the mounting point and can partially restore caster reduced by the lift. The actual result depends on the true lift height, springs, arms, axle position and condition of the complete suspension.

This set does not replace a professional alignment and cannot guarantee a specific caster value. The eccentric bushes must be installed in the specified rotational position.

Kit contents

• Front control arms, axle side: 4 eccentric PU bushes and 4 metal sleeves
• Front control arms, frame side: 4 regular PU bushes
• Rear control arms, axle side: 4 regular PU bushes and 4 metal sleeves
• Rear control arms, frame side: 4 regular PU bushes
• Assembly grease

Installation note

Install the eccentric bushes precisely in the intended rotational position. After fitting, have caster, axle position, steering-wheel position and suspension geometry checked professionally.