30-day return policy
Take advantage of our extended return window
Tested fit
We stand behind our products – if it doesn't fit, it goes back.
100% buyer protection
Encrypted purchase process & buyer protection from payment providers.
Heavy-Duty PU Bushing Kit – Mitsubishi L200 K-Series (1986–2003)
32 mm
$166.00
Skip to product information
Heavy-Duty PU Bushing Kit – Mitsubishi L200 K-Series (1986–2003)
$166.00
Taxes included.
Shipping calculated at checkout.
Upgrade the suspension mounting points of your Mitsubishi L200 K-Series for regular off-road driving, high payloads or sustained work use. The front control arms locate the wheels while the rear leaf springs and shackles guide the axle under load. Soft or worn original rubber can allow more movement than intended.
This blue 85 Shore A heavy-duty polyurethane kit renews the listed front and rear mounting points and is available in three widths for the front mount of the rear leaf spring.
Key details
- Fits: Mitsubishi L200 K22, K25, K34, K74, K76 and K77, 1986–2003
- Position: Front control arms, rear leaf springs, shackles and front anti-roll bar
- Options: 32, 35 or 41 mm width at the front mount of the rear leaf spring
- Version: Heavy-duty off-road
- Material: Polyurethane
- Hardness: 85 Shore A
- Colour: Blue
Measure before ordering
Measure the width of the front mounting point of the rear leaf spring directly on the vehicle. Your selected option determines the matching bush and metal sleeve for this position.
More stable wheel and axle location
The firmer PU deforms less than aged rubber under braking, cornering and payload forces. This can help the front control arms retain wheel position more precisely and allow the leaf springs and shackles to guide the rear axle more consistently around their intended pivot points.
The firmer mounting can transmit more impacts, noise and vibration to the chassis and body. Worn spring bolts, shackles, joints or deformed control arms must be replaced separately.
Kit contents
- Front upper control arms: 4 PU bushes and 4 metal sleeves
- Front lower control arms: 2 PU bushes and 2 metal sleeves
- Frame-side front lower control-arm mounts: 2 PU bushes and 2 metal sleeves
- Front mounts of the rear leaf springs: 2 PU bushes and 2 metal sleeves in the selected width
- Rear leaf-spring mounts: 4 PU bushes
- Leaf-spring shackles: 4 PU bushes
- Front anti-roll bar, inner mounts: 2 PU bushes
- Front anti-roll bar, outer mounts: 2 PU bushes
Installation note
Inspect the control arms, spring bolts, shackles, anti-roll bar and mounts for corrosion, scoring or deformation. Suspension and axle-location work should be carried out professionally.
Choose version
These versions have different hardness levels and recommended uses.