Mitsubishi Pajero 2 V20 PU Bushing Set

• Mitsubishi

• Pajero 2 V20

Renew the main suspension bushes on your Mitsubishi Pajero II V20. The front control arms, rear control arms and Panhard rod work together to locate the wheels and rear axle; after many years, soft or worn rubber can allow additional movement and noise.

This orange 75 Shore A polyurethane kit is available with either 60 or 65 mm axle-side rear control-arm bushes.

Key details

• Fits: Mitsubishi Pajero II V20, NH, NJ, NK and NL, 05/1991–04/2000
• Rear axle-side width: 60 or 65 mm
• Material: Polyurethane
• Hardness: 75 Shore A
• Colour: Orange
• Rear anti-roll-bar bushes: For a 20 mm bar

Measure 60 or 65 mm before ordering

The option applies to the axle-side mounts of the rear control arms. Measure the mounting width directly on the vehicle; model year and engine alone are not a reliable basis for selection.

Kit contents

• Front lower control arms: 2 PU bushes and 2 metal sleeves at each listed position
• Rear control arms, axle side: 4 PU bushes and 4 metal sleeves in the selected width
• Rear control arms, chassis side: 4 PU bushes
• Rear Panhard rod: 2 PU bushes and 2 metal sleeves
• Steering idler support: 2 PU bushes
• Anti-roll-bar links: 12 PU bushes
• Front anti-roll bar: 2 PU bushes
• Rear anti-roll bar: 2 PU bushes for a 20 mm bar

Installation note

Compare the selected width with the removed original bush. Inspect all control arms, the Panhard rod, anti-roll bars and mounting points for corrosion, deformation and wear, and recheck all fasteners after fitting.