30-day return policy
Take advantage of our extended return window
Tested fit
We stand behind our products – if it doesn't fit, it goes back.
100% buyer protection
Encrypted purchase process & buyer protection from payment providers.
XXL Eccentric PU Bushing Kit – Nissan Patrol Y60/Y61 2.8 TD, 50 mm Lift
15 mm / 15 mm
$237.00
Skip to product information
XXL Eccentric PU Bushing Kit – Nissan Patrol Y60/Y61 2.8 TD, 50 mm Lift
$237.00
Taxes included.
Shipping calculated at checkout.
Combine partial caster correction with a comprehensive suspension-bush overhaul on your Nissan Patrol Y60 or early Y61 2.8 TD lifted by approximately 50 mm / 2 inches. A lift reduces front-axle caster, while aged rubber at the control arms, Panhard rods and anti-roll bars can allow additional movement.
This orange 75 Shore A XXL polyurethane kit includes eccentric front control-arm bushes together with axle-location and anti-roll-bar bushes in the selected diameters.
Key details
- Fits: Nissan Patrol Y60 2.8 TD, 1987–1997, and Y61 2.8 TD, 1998–2000
- Application: Approximately 50 mm / 2 in suspension lift
- Version: XXL kit including anti-roll-bar bushes
- Material: Polyurethane
- Hardness: 75 Shore A
- Colour: Orange
Measure both anti-roll bars before ordering
The option name lists the front diameter first and the rear diameter second.
- Front anti-roll bar: 15, 21 or 24 mm
- Rear anti-roll bar: 15 or 17 mm
Measure directly on a clean, corrosion-free section of each bar. The selected size refers to the bar diameter, not the outside diameter of the old bush.
Caster correction and more controlled axle location
The eccentric axle-side bushes can partially restore caster reduced by the lift. Polyurethane retains its shape better than aged rubber and can help the control arms, Panhard rods and anti-roll bars perform their functions more consistently.
Kit contents
- Front control arms, axle side: 4 eccentric PU bushes and 4 metal sleeves
- Front control arms, chassis side: 4 PU bushes
- Front and rear Panhard rods: 2 PU bushes and 2 metal sleeves for each rod
- Rear upper and lower control arms: 4 PU bushes and 4 metal sleeves for each pair
- Frame-side rear lower control-arm mounts: 2 additional PU elements
- Front anti-roll bar: 2 PU bushes in the selected diameter
- Rear anti-roll bar: 2 PU bushes in the selected diameter
Installation note
Install the eccentric bushes in the specified rotational position. Check caster, axle position and suspension geometry professionally after fitting.
Choose version
These versions have different hardness levels and recommended uses.