30-day return policy
Take advantage of our extended return window
Tested fit
We stand behind our products – if it doesn't fit, it goes back.
100% buyer protection
Encrypted purchase process & buyer protection from payment providers.
Nissan Terrano 1 WD21 PU Bushing Set
$179.00
Skip to product information
Nissan Terrano 1 WD21 PU Bushing Set
$179.00
Taxes included.
Shipping calculated at checkout.
Renew the main front- and rear-suspension bushes on your Nissan Terrano I WD21 and reduce play at the control arms, rear axle links, Panhard rod and anti-roll bars. Soft or worn rubber can allow additional wheel and axle movement under braking, cornering and drive forces.
This orange 75 Shore A polyurethane kit is designed for road use, overland travel and mixed off-road driving.
Key details
- Fits: Nissan Terrano I WD21, 1987–1993
- Position: Front and rear suspension
- Material: Polyurethane
- Hardness: 75 Shore A
- Colour: Orange
More defined wheel and axle location
Polyurethane deforms less than aged rubber and can help the front control arms and rear axle links retain their intended position more consistently. The final result also depends on joints, wheel bearings, dampers and steering components.
Kit contents
- Front upper control arms: 4 PU bushes and 4 metal sleeves
- Front lower control arms: 2 PU bushes and 2 metal sleeves
- Frame-side front lower control-arm mounts: 2 PU bushes and 2 metal sleeves
- Rear upper control arms: 4 PU bushes and 4 metal sleeves
- Rear lower control arms: 4 PU bushes and 4 metal sleeves
- Rear Panhard rod: 2 PU bushes and 2 metal sleeves
- Anti-roll-bar links: 8 PU bushes
- Front anti-roll bar: 2 PU bushes
- Rear anti-roll bar: 2 PU bushes
Important installation note
At the front upper control arms, remove only the old rubber. The original outer metal shell remains in the arm and is reused for the PU bush. Remove all other old bushes completely and inspect every mounting point before fitting.
Choose version
These versions have different hardness levels and recommended uses.