Opel Frontera B Off-Road PU Bushing Set

• Opel

• Frontera B

Prepare the front- and rear-suspension mounting points on your Opel Frontera B for regular off-road use, high payloads and sustained heavy loads. Soft or worn rubber can allow additional wheel and axle movement at the control arms, rear links and Panhard rod.

This blue 85 Shore A heavy-duty polyurethane kit covers the listed front and rear positions.

Key details

• Fits: Opel Frontera B, 1999–2004
• Version: Heavy-duty off-road
• Material: Polyurethane
• Hardness: 85 Shore A
• Colour: Blue

Firmer wheel and axle location

The firmer PU limits deformation at the control arms, rear axle links and Panhard rod more strongly than aged rubber. This can retain wheel and axle position more consistently under braking, drive and lateral forces.

The trade-off can be increased transfer of impacts, noise and vibration to the chassis and body. Worn joints, wheel bearings, steering parts or dampers must be repaired separately.

Kit contents

• Front lower control arms: 2 PU bushes and 2 metal sleeves
• Frame-side front lower control-arm mounts: 2 PU bushes and 2 metal sleeves
• Front upper control arms: 4 PU bushes
• Rear upper control arms: 4 PU bushes and 4 metal sleeves
• Rear lower control arms: 4 PU bushes and 4 metal sleeves
• Rear Panhard rod: 2 PU bushes and 2 metal sleeves
• Front anti-roll bar: 2 PU bushes
• Rear anti-roll bar: 2 PU bushes
• Rear anti-roll-bar links: 4 PU bushes

Installation note

Remove the old bushes completely, clean all contact surfaces and inspect the arms and mounts for wear or deformation. Suspension and axle-location work should be carried out professionally.