Panhard Rod PU Bushing Kit – Mercedes G-Class W460/W461/W463

• Mercedes Benz

• G class

Renew the front and rear Panhard-rod bushes on your Mercedes G-Class and restore more controlled lateral axle location. Even limited play at these mounting points can allow the solid axles to move sideways and contribute to less settled responses in ruts or during steering inputs.

This orange 75 Shore A polyurethane kit is available with a 37 or 41 mm outside diameter. All four bushes in the selected set have the same size.

Key details

• Fits: Mercedes-Benz G-Class W460, W461 and W463
• Position: Front and rear Panhard rods
• Outside diameter: Select 37 or 41 mm
• Material: Polyurethane
• Hardness: 75 Shore A
• Colour: Orange
• Metal sleeves and assembly grease: Included

Measure both rods before ordering

The kit contains four bushes in one selected size. Measure the existing bushes on both the front and rear Panhard rods. If different sizes are fitted, two separate size sets are required.

More defined lateral axle location

Polyurethane deforms less than aged rubber under lateral forces and can help the Panhard rods keep both axles centred more consistently. The final result also depends on the rods, bolts, mounts, steering and remaining suspension components.

Kit contents

• 4 PU Panhard-rod bushes in the selected size
• 4 metal sleeves
• Assembly grease

Installation note

Inspect both Panhard rods, bolts and mounting points for wear or deformation. Use the supplied grease and check all fasteners, axle guidance and steering behaviour after installation.