Heavy-Duty Front Anti-Roll Bar & Link PU Bushing Kit – Mercedes G-Class W460/W461/W463

• Mercedes Benz

• G class

Renew the front anti-roll-bar and link bushes on your Mercedes G-Class for demanding off-road use and high suspension loads. Soft or worn rubber can allow additional movement at the chassis mounts and links before the bar's force is fully transferred.

This blue 85 Shore A heavy-duty polyurethane kit is available for either a 29 or 32 mm front anti-roll bar.

Key details

• Fits: Mercedes G-Class W460, W461 and W463
• Position: Front anti-roll bar and links
• Available sizes: 29 or 32 mm anti-roll-bar diameter
• Version: Heavy-duty off-road
• Material: Polyurethane
• Hardness: 85 Shore A
• Colour: Blue

Measure before ordering

Measure the diameter directly on the cleaned anti-roll bar, not on the old bush. Rust, dirt or thick paint can distort the reading.

More direct transfer under load

The firmer PU limits deformation at the chassis mounts and links more strongly than aged rubber. This can transfer anti-roll-bar movement more directly under high loads.

The firmer connection can also transmit more noise and vibration to the chassis and body. Defective links or damaged retaining brackets must be replaced separately.

Kit contents

• 2 PU bushes for the front anti-roll bar in the selected diameter
• 4 PU bushes for the anti-roll-bar links
• 4 metal sleeves

Installation note

Inspect the anti-roll bar, retaining brackets, links and fasteners for wear or deformation. Clean all mounting surfaces and install the bushes without preload.