30-day return policy
Take advantage of our extended return window
Tested fit
We stand behind our products – if it doesn't fit, it goes back.
100% buyer protection
Encrypted purchase process & buyer protection from payment providers.
Eccentric PU Bushing Set for Suzuki Jimny FJ with Approx. 50 mm Lift
$214.00
Skip to product information
Eccentric PU Bushing Set for Suzuki Jimny FJ with Approx. 50 mm Lift
$214.00
Taxes included.
Shipping calculated at checkout.
A suspension lift changes the front-axle caster of the Suzuki Jimny FJ. At the same time, aged rubber bushes in the control arms and Panhard rods can allow additional axle movement. This complete PU kit addresses both issues in one coordinated upgrade.
The orange 75 Shore A set combines eccentric bushes at the axle-side mounts of the front control arms with regular polyurethane bushes at the remaining locations. It is intended to provide partial caster correction for a lift of approximately 50 mm / 2 inches.
Key details
- Fits: Suzuki Jimny FJ, 1998–2018
- Application: Suspension lift of approximately 50 mm / 2 in
- Position: Front and rear control arms and Panhard rods
- Material: Polyurethane
- Hardness: 75 Shore A
- Colour: Orange
Caster correction with eccentric bushes
The offset bore repositions the front axle within the mounting point and can partially restore caster reduced by the lift. The actual result depends on the true lift height, springs, control arms, axle position and the condition of the complete suspension.
This kit does not replace a professional alignment and cannot guarantee a specific caster value. The eccentric bushes must be installed in the specified rotational position.
More defined axle location
Aged rubber can deform more under braking, drive and lateral forces. Polyurethane retains its shape better and can reduce unwanted longitudinal movement at the control arms and lateral movement at the Panhard rods.
Kit contents
- Front control arms, axle side: 4 eccentric PU bushes and 4 metal sleeves
- Front control arms, chassis side: 2 regular PU bushes and 2 metal sleeves
- Front Panhard rod: 2 PU bushes and 2 metal sleeves
- Rear control arms, axle side: 4 regular PU bushes and 4 metal sleeves
- Rear control arms, chassis side: 2 regular PU bushes and 2 metal sleeves
- Rear Panhard rod: 2 PU bushes and 2 metal sleeves
Installation note
Install the eccentric bushes precisely in the specified rotational position. After fitting, have caster, axle position, steering-wheel position and suspension geometry checked professionally.
Choose version
These versions have different hardness levels and recommended uses.