Off-Road PU Bushing Kit – Hyundai Galloper (05/1991–04/2000)

• Hyundai

• Galloper

Prepare the main suspension mounting points on your Hyundai Galloper for demanding off-road use and high loads. Soft or worn original rubber can allow additional wheel and axle movement at the front suspension, rear control arms and Panhard rod.

This blue 85 Shore A heavy-duty polyurethane kit is available with either 60 or 65 mm axle-side rear control-arm bushes.

Key details

• Fits: Hyundai Galloper, 05/1991–04/2000
• Version: Heavy-duty off-road
• Rear axle-side width: 60 or 65 mm
• Material: Polyurethane
• Hardness: 85 Shore A
• Colour: Blue

Measure 60 or 65 mm before ordering

The option applies to the axle-side mounts of the rear control arms. Measure the mounting width directly on the vehicle rather than selecting only by model year or engine.

Firmer location under load

The firmer PU deforms less under high loads and can help retain wheel and axle position more consistently. The trade-off can be increased transfer of impacts, noise and fine vibration to the chassis and body.

Kit contents

• Front lower control arms: 2 PU bushes and 2 metal sleeves
• Frame-side front lower control-arm mounts: 2 PU bushes and 2 metal sleeves
• Rear control arms, axle side: 4 PU bushes and 4 metal sleeves in the selected width
• Rear control arms, chassis side: 4 PU bushes
• Rear Panhard rod: 2 PU bushes and 2 metal sleeves
• Steering idler support: 2 PU bushes
• Anti-roll-bar links: 12 PU bushes
• Front anti-roll bar: 2 PU bushes
• Rear anti-roll bar: 2 PU bushes

Installation note

Compare the selected width with the original bush before installation. Inspect all arms, the Panhard rod, anti-roll bars, bolts and mounting points for corrosion, deformation and wear.