Off-Road PU Bushing Kit – Isuzu Trooper II (05/1992–01/1998)

• Isuzu

• Trooper 2

Prepare the main front- and rear-suspension mounting points on your Isuzu Trooper II for regular off-road use, high payloads and sustained heavy loads. Soft or worn rubber can allow additional wheel and axle movement under braking, drive and lateral forces.

This blue 85 Shore A heavy-duty polyurethane kit covers the listed control-arm, rear Panhard-rod and anti-roll-bar positions.

Key details

• Fits: Isuzu Trooper II, 05/1992–01/1998
• Version: Heavy-duty off-road
• Material: Polyurethane
• Hardness: 85 Shore A
• Colour: Blue
• Metal sleeves and assembly grease: Included

Firmer wheel and axle location

The firmer PU limits deformation at the control arms, rear axle links and Panhard rod more strongly than aged rubber. This can retain wheel and axle position more consistently under load, but can also transmit more impacts, noise and vibration.

Kit contents

• Front lower control arms: 2 PU bushes and 2 metal sleeves
• Frame-side front lower control-arm mounts: 2 PU bushes and 2 metal sleeves
• Front upper control arms: 4 PU bushes
• Rear upper control arms: 2 PU bushes and 2 metal sleeves
• Rear lower control arms: 4 PU bushes and 4 metal sleeves
• Rear Panhard rod: 2 PU bushes and 2 metal sleeves
• Front anti-roll bar: 2 PU bushes
• Rear anti-roll bar: 2 PU bushes
• Rear anti-roll-bar link bushes: 4 PU bushes
• Assembly grease

Installation note

Remove the old bushes completely, clean all mounting surfaces and use the supplied grease. Inspect every arm, bolt and mount for corrosion, wear or deformation.