30-day return policy
Take advantage of our extended return window
Tested fit
We stand behind our products – if it doesn't fit, it goes back.
100% buyer protection
Encrypted purchase process & buyer protection from payment providers.
XXL PU Bushing Set for Jeep Grand Cherokee WJ / WG
$355.00
Skip to product information
XXL PU Bushing Set for Jeep Grand Cherokee WJ / WG
$355.00
Taxes included.
Shipping calculated at checkout.
Renew the main axle-location and anti-roll-bar mounting points on your Jeep Grand Cherokee WJ/WG with one comprehensive XXL kit. Worn original rubber bushes can allow additional axle movement, vague responses and play at the anti-roll bars and rear links.
This orange 75 Shore A polyurethane set covers the listed front and rear suspension mounting points. It is designed for road use, overland travel and mixed off-road driving, offering a more defined connection than soft or aged rubber without relying on exaggerated durability claims.
Key details
- Fits: Jeep Grand Cherokee WJ and WG
- Position: Control arms, front Panhard rod, anti-roll bars and rear links
- Version: XXL standard kit
- Material: Polyurethane
- Hardness: 75 Shore A
- Colour: Orange
More defined axle location
Aged rubber can deform more heavily under braking, drive and lateral forces. Polyurethane retains its shape better and can reduce unwanted fore-and-aft movement at the control arms and lateral movement at the Panhard rod.
The final result also depends on the condition of joints, bolts, mounting points, wheel bearings, steering, anti-roll bars and dampers.
Kit contents
- Front lower control arms: 4 PU bushes and 4 metal sleeves
- Front upper control arms: 4 PU bushes and 4 metal sleeves
- Rear lower control arms: 4 PU bushes and 4 metal sleeves
- Rear upper A-arm: 2 PU bushes
- Front Panhard rod: 2 PU bushes and 2 metal sleeves
- Front anti-roll bar: 2 PU bushes
- Rear anti-roll bar: 2 PU bushes
- Rear anti-roll-bar links: 4 PU bushes and 4 metal sleeves
Important note on the original outer sleeves
The original outer metal sleeves remain in the front control arms and rear lower control arms. Remove only the old rubber without damaging these sleeves; the new PU bushes are installed into the retained original sleeves.
Installation note
Inspect all arms, sleeves, bolts and mounting points for corrosion, scoring or deformation. Work on axle-location components should be carried out professionally.
Choose version
These versions have different hardness levels and recommended uses.