Off-Road PU Bush Set for Jeep Grand Cherokee ZJ / ZG

• Jeep

• ZJ ZG Grand Cherokee

Off road and under high payloads, the suspension mounting points on the Jeep Grand Cherokee ZJ/ZG are subjected to constantly changing loads. Soft or worn rubber bushes can allow additional movement at the control arms, Panhard rod and anti-roll bars.

This blue heavy-duty off-road version renews the listed mounting points on the front and rear axles. The main bushes are rated at 85 Shore A, while the front Panhard-rod bushes use 90 Shore A.

Key specifications

• Fits: Jeep Grand Cherokee ZJ and ZG
• Version: Heavy-duty off-road
• Main bush hardness: 85 Shore A
• Front Panhard rod: 90 Shore A
• Colour: Blue
• Material: Polyurethane

Firmer location of both solid axles

The firmer polyurethane deflects less under braking, cornering and drive forces and can help keep the axle position more consistent. The trade-off is that impacts, noise and vibration may be transmitted more noticeably into the frame and body.

Kit contents

• Front lower control arms: 4 PU bushes and 4 metal sleeves
• Front upper control arms: 4 PU bushes and 4 metal sleeves
• Rear lower control arms: 4 PU bushes and 4 metal sleeves
• Rear upper control arms: 4 PU bushes and 4 metal sleeves
• Front Panhard rod: 3 PU bushes, 90 Shore A, and 3 metal sleeves
• Front anti-roll bar: 2 PU bushes for 26 mm diameter
• Rear anti-roll bar: 2 PU bushes for 16 mm diameter
• Anti-roll-bar links: 8 PU bushes and 2 metal sleeves
• Shock-absorber mounts: 6 PU bushes

Installation note

At the designated control-arm positions, remove only the old rubber; the original outer metal shells remain in the arms. Mark all positions before disassembly and inspect the steering and remaining suspension components at the same time.