30-day return policy
Take advantage of our extended return window
Tested fit
We stand behind our products – if it doesn't fit, it goes back.
100% buyer protection
Encrypted purchase process & buyer protection from payment providers.
PU Bushing Set for Jeep Grand Cherokee ZJ / ZG
$273.00
Skip to product information
PU Bushing Set for Jeep Grand Cherokee ZJ / ZG
$273.00
Taxes included.
Shipping calculated at checkout.
Renew the main axle-location and anti-roll-bar bushes on your Jeep Grand Cherokee ZJ/ZG. The control arms and front Panhard rod determine how precisely both solid axles remain located under braking, cornering and drive forces.
This orange polyurethane kit uses 75 Shore A for the main control-arm bushes and 90 Shore A for the front Panhard-rod positions.
Key details
- Fits: Jeep Grand Cherokee ZJ and ZG
- Main-bush hardness: 75 Shore A
- Front Panhard-rod hardness: 90 Shore A
- Colour: Orange
- Material: Polyurethane
More defined axle location
Polyurethane deforms less than aged rubber under braking, cornering and drive forces. This can help retain axle and control-arm position more consistently. The final result also depends on ball joints, steering, wheel bearings and the rest of the suspension.
Kit contents
- Front lower control arms: 4 PU bushes and 4 metal sleeves
- Front upper control arms: 4 PU bushes and 4 metal sleeves
- Rear lower control arms: 4 PU bushes and 4 metal sleeves
- Rear upper control arms: 4 PU bushes and 4 metal sleeves
- Front Panhard rod: 3 PU bushes in 90 Shore A and 3 metal sleeves
- Front anti-roll bar: 2 PU bushes
- Rear anti-roll bar: 2 PU bushes
- Anti-roll-bar links: 8 PU bushes and 2 metal sleeves
- Shock-absorber mounts: 6 PU bushes
Installation note
At the designated control-arm positions, remove only the old rubber; the original outer metal shell remains in the arm. Mark all positions before removal and inspect all arms, bolts and mounting points for wear or deformation.
Choose version
These versions have different hardness levels and recommended uses.