Nissan Terrano 2 R20 PU Bushing Set

• Nissan

• Terrano 2 R20

Renew the main suspension bushes on your Nissan Terrano II R20 and reduce wear-related movement at the front control arms, rear axle links, Panhard rod and anti-roll bars. Soft or cracked original rubber can allow play to accumulate across several mounting points.

This orange 75 Shore A polyurethane kit is designed for road use, overland travel and mixed off-road driving.

Key details

• Fits: Nissan Terrano II R20, 1993–2003
• Position: Front control arms, rear axle links, Panhard rod and anti-roll bars
• Material: Polyurethane
• Hardness: 75 Shore A
• Colour: Orange
• Metal sleeves and assembly grease: Included

Reduce accumulated suspension play

Polyurethane deforms less than aged rubber under braking, drive and lateral forces and can help the front control arms and rear axle links retain their intended position more consistently. The final result also depends on joints, wheel bearings, dampers and steering components.

Kit contents

• Front upper control arms: 4 PU bushes and 4 metal sleeves
• Front lower control arms: 2 PU bushes and 2 metal sleeves
• Frame-side front lower control-arm mounts: 2 PU bushes and 2 metal sleeves
• Rear upper control arms: 4 PU bushes and 4 metal sleeves
• Rear lower control arms: 4 PU bushes and 4 metal sleeves
• Rear Panhard rod: 2 PU bushes and 2 metal sleeves
• Anti-roll-bar link bushes: 8 PU bushes
• Front anti-roll bar: 2 PU bushes
• Rear anti-roll bar: 2 PU bushes
• Assembly grease

Important installation note

At the front upper control arms, remove only the old rubber and retain the original outer metal shell in the arm. Inspect every mounting point, clean the contact surfaces and use the supplied grease.