PU Buchsen Set für Opel Frontera A und Isuzu Trooper 1 mit Blattfedern

PU Bushing Set for Opel Frontera A / Isuzu Trooper 1 with Leaf Springs

$203.00
Skip to product information
PU Buchsen Set für Opel Frontera A und Isuzu Trooper 1 mit Blattfedern

PU Bushing Set for Opel Frontera A / Isuzu Trooper 1 with Leaf Springs

$203.00
Taxes included. Shipping calculated at checkout.
  • Opel
  • Isuzu
  • Frontera A
  • Trooper 1

Renew the key suspension mounting points on an Opel Frontera A with rear leaf springs or an Isuzu Trooper I. Worn original rubber can allow the front control arms, rear leaf springs and anti-roll bar to move more than intended.

This orange 75 Shore A polyurethane kit covers the listed front and rear suspension bushes and is designed for road use, overland travel, work duties and mixed off-road driving.

Key details

  • Fits: Opel Frontera A, 1991–1995, only with rear leaf springs
  • Also fits: Isuzu Trooper I, 04/1987–04/1992
  • Position: Front control arms, rear leaf springs and front anti-roll bar
  • Material: Polyurethane
  • Hardness: 75 Shore A
  • Colour: Orange

Why replace aged rubber?

Aged rubber can deform more under braking, cornering and payload forces. Polyurethane retains its shape better and can locate the front control arms more precisely while allowing the leaf springs and shackles to guide the rear axle more consistently around their intended pivot points.

The final result also depends on the condition of the control arms, spring bolts, shackles, anti-roll-bar mounts, dampers and other suspension parts.

Kit contents

  • Front lower control arms: 2 PU bushes and 2 metal sleeves
  • Frame-side front lower control-arm mounts: 2 PU bushes and 2 metal sleeves
  • Front upper control arms: 4 regular concentric PU bushes
  • Rear leaf-spring front mounts: 2 PU bushes and 2 metal sleeves
  • Rear leaf-spring and shackle mounts: 8 PU bushes
  • Front anti-roll bar: 2 PU bushes

Installation note

Inspect the arms, spring bolts, shackles, anti-roll bar and mounts for corrosion, scoring or deformation. Remove the old bushes completely, clean the contact surfaces and finally tighten the leaf-spring fasteners at normal ride height.

This fits with:

You might also like

30-day return policy

Take advantage of our extended return window

Tested fit

We stand behind our products – if it doesn't fit, it goes back.

100% buyer protection

Encrypted purchase process & buyer protection from payment providers.