Toyota Land Cruiser 120 PU Bushing Set

• Toyota

• Land Cruiser 120

Renew the main front- and rear-suspension bushes on your Toyota Land Cruiser J120 and reduce wear-related movement across the control arms, rear Panhard rod and anti-roll bars. This comprehensive kit is intended for a coordinated suspension overhaul rather than the replacement of only one mounting point.

The orange 75 Shore A polyurethane specification provides a balanced setup for road use, travel and mixed off-road driving.

Key details

• Fits: Toyota Land Cruiser J120 from 2003
• Rear anti-roll bar: Select 16 or 19 mm
• Material: Polyurethane
• Hardness: 75 Shore A
• Colour: Orange
• Metal sleeves and assembly grease: Included

Measure the rear anti-roll bar before ordering

Different rear anti-roll-bar diameters were fitted. Measure the bar directly beside the bush; do not select 16 or 19 mm solely by model year or engine.

More defined suspension location

Polyurethane deforms less than aged rubber under braking, drive and lateral forces and can help the control arms and rear Panhard rod retain their intended position more consistently. The final result also depends on the condition of joints, wheel bearings, dampers and steering components.

Kit contents

• Front lower control arms: 4 PU bushes and 4 metal sleeves
• Front upper control arms: 4 PU bushes and 4 metal sleeves
• Rear upper control arms: 4 PU bushes and 4 metal sleeves
• Rear lower control arms: 4 PU bushes and 4 metal sleeves
• Rear Panhard rod: 2 PU bushes and 2 metal sleeves
• Front anti-roll bar: 2 PU bushes
• Rear anti-roll bar: 2 PU bushes in the selected size
• Assembly grease

Installation note

Remove the old bushes completely, clean all mounting points and use the supplied grease. Check all fasteners and the suspension geometry professionally after fitting.