Heavy-Duty PU Bushing Kit – Toyota Land Cruiser J90/J95

• Toyota

• Land Cruiser 90
• Land Cruiser 95

Prepare the suspension of your Toyota Land Cruiser or Prado J90/J95 for regular off-road use, high payloads and sustained heavy loads. Worn rubber can allow additional movement across the front and rear control arms, rear Panhard rod and anti-roll bars.

This blue 85 Shore A heavy-duty polyurethane kit renews the listed mounting points and is available with either 16 or 19 mm rear anti-roll-bar bushes.

Key details

• Fits: Toyota Land Cruiser / Prado J90 and J95, 01/1996–01/2003
• Rear anti-roll bar: Select 16 or 19 mm
• Version: Heavy-duty off-road
• Material: Polyurethane
• Hardness: 85 Shore A
• Colour: Blue
• Metal sleeves and assembly grease: Included

Measure the rear anti-roll bar before ordering

Measure the bar directly beside the bush. Model year and engine alone are not sufficient for selecting 16 or 19 mm.

Firmer geometry under high loads

The firmer PU limits deformation at the control arms and Panhard rod more strongly than aged rubber and can retain wheel and axle position more consistently under load.

The trade-off can be increased transfer of impacts, road noise and vibration to the body.

Kit contents

• Front lower control arms: 4 PU bushes and 4 metal sleeves
• Front upper control arms: 4 PU bushes and 4 metal sleeves
• Rear upper control arms: 4 PU bushes and 4 metal sleeves
• Rear lower control arms: 4 PU bushes and 4 metal sleeves
• Rear Panhard rod: 2 PU bushes and 2 metal sleeves
• Front anti-roll bar: 2 PU bushes
• Front anti-roll-bar link bushes: 4 PU bushes
• Rear anti-roll bar: 2 PU bushes in the selected size
• Assembly grease

Installation note

Remove the old bushes completely, clean all mounting surfaces and use the supplied grease. Inspect every arm and mount and check suspension geometry professionally after fitting.